dji Focus Manual de inicio rápido - Página 2

Navegue en línea o descargue pdf Manual de inicio rápido para Mando a distancia dji Focus. dji Focus 2 páginas. Accessory support frame
También para dji Focus: Manual de inicio rápido (6 páginas), Manual de inicio rápido (2 páginas)

Imprimir página

Attaching the Neck Strap

Insert the neck strap connector while pulling on the button.

Ensure the neck strap is attached securely.

●

Settings

Turn on the remote controller by holding down the power button for 2 seconds.

The Focus Remote Controller controls the focus of the Zenmuse X5 by

default. To enable aperture control, select 'Menu (right key) > Aperture > On'.

50.0%

Once aperture control is enabled, the 'D' button is used to switch between focus

control and aperture control. To switch from focus control to aperture control, press

the 'D' button and then follow the instructions in the DJI GO app to operate the

focus wheel.

The remote controller overrides the in-app controls. You will not be

●

able to adjust the focus or aperture in the DJI GO app.

Enter Menu

D Button

Using with the Zenmuse X5

To allow the Focus Remote Controller to control the focus and aperture of the Zenmuse X5, connect the

communication port on the Focus Remote Controller to the CAN Bus port on the Inspire 1 remote

controller using the dedicated CAN Bus cable.

Ensure that the Zenmuse X5 camera is set in AF mode.

●

In the DJI GO app, ensure that the shooting mode is set to 'M' (Manual mode) or 'A' (Aperture priority).

●

Basic Operation

Turn the focus wheel to control focus

or aperture of the lens.

For more information, read the user manual:

http://www.dji.com/product/focus/download