dji RM220 Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Mando a distancia dji RM220. dji RM220 17 páginas.
También para dji RM220: Manual del usuario (10 páginas)

Imprimir página

DJI RC Motion 2 User Manual

Controlling the camera tilt: before takeoff or during RTH and landing, press and hold the

dial from the FPV view and then scroll up or down to tilt the camera. Release the dial to

stop the camera tilt.

Shutter/Record Button

Press and hold to switch between the photo and video modes. Press once to take a photo

or to start or stop recording.

Controlling the Aircraft

• To ensure flight safety when controlling the aircraft with the motion controller,

press the lock button once to make the aircraft brake and hover before operating

the goggles. Failure to do so is a safety risk and may lead to the aircraft losing

control.

Accelerator

Mode Button

The motion controller has two modes: Normal mode and Sport mode. Normal mode is

selected by default. Press the mode button to switch between Normal and Sport mode.

Press and hold to initiate RTH. Press again to cancel RTH.

Lock Button

Use the lock button to control the takeoff, landing, and brake of the aircraft:

Takeoff: press twice to start the aircraft motors, then press and hold to make the aircraft

take off. The aircraft will ascend to approximately 1.2 m and hover.

Landing: press and hold the lock button while the aircraft is hovering to land and stop the

motors automatically.

Brake: during flight, press once to brake the aircraft and make it hover in place with the

attitude locked. Press again to unlock the attitude and resume the flight control.

When the aircraft is performing RTH or auto landing, press the button once to cancel RTH

or landing.

Lock Button

Joystick

Mode Button