djm direct VMA915 Manual - Página 2

Navegue en línea o descargue pdf Manual para Equipos de limpieza djm direct VMA915. djm direct VMA915 5 páginas. Valet machine wet & dry 30ltr stainless bin

Imprimir página

2. INTRODUCTION

High powered unit ideal for cleaning carpets, car interiors, fabrics and upholstery. Supplied with carpet lance, hand held lance, full wet and

dry vacuum accessory kit including stainless steel rigid extension tube, cartridge filter and foam filter. Large capacity drum with external

detergent tank for easy filling. Features remote operation controls on nozzle enabling switching between vacuum and detergent modes

uninterrupted. Fitted with two fixed wheels and two castors, cable storage hooks and accessory storage slots.

3. SPECIFICATION

Model No:................................................................ VMA915

Consumable parts:

VMR921 - Carpet/Upholstery Detergent 1L Pack of 10,

VMR921S - Carpet/Upholstery Detergent 1L,

VMR925 - Carpet/Upholstery Detergent 5L Pack of 4,

VMR925S - Carpet/Upholstery Detergent 5L

Drum size: ........................................................................ 30L

Filter type: ...................................................................... foam

Motor power: ...............................................................1500W

Replacement parts:

PC200FF10 - Foam Filter,

PC300PB5 - Dust Collection Bag (Pack of 5),

PC310CF - Cartridge Filter

Supply: ...........................................................................230V

ITEM DESCRIPTION

Main switch.

Mode selection buttons

Detergent pipe coupling.

Suction hose inlet.

Detergent tank connecting hose.

Detergent tank.

Drainage outlet.

Cartridge filter and lid.

Foam filter.

10.

Nozzle.

11.

Hand held lance.

12.

Stainless steel extension tube.

13.

Suction hose.

14.

Crevice tool.

15.

Round brush.

16.

Combination floor brush.

17.

Carpet lance.

18.

Top section

19.

Main drum

4. ASSEMBLY

DO NOT connect the mains plug yet.

4.1.

Undo main drum clasps and lift off the top section (18).

4.2.

Remove contents from inside the tank. Check and identify each component as listed in fig.1. If anything is missing or damaged

please contact your supplier immediately.

4.3.

Insert a large wheel on each side of the rear basket and ensure they are pushed all the way in.

4.4.

Turn the main drum (19) upside down and insert the moulded castor mountings into their positions in the black base until they lock

into position.

4.5.

For dry suction fit the cartridge filter (8).

4.6.

For carpet washing or wet suction fit the foam filter (9).

4.7.

Re-assemble the top section (18) to the main drum (19).

4.8.

Fasten the 2 clasps.

4.9.

Attach the suction hose (13) to the suction inlet (4) on the front of the main drum.

4.10.

Twist and lock the end of the suction hose (13) into the nozzle (10). Push the end of the nozzle (10) into the stainless steel

extension tube (12). Fit the required accessory to the base of the stainless steel extension tube (12) or directly to the nozzle (10) if

the stainless steel extension tube (12) is not required.

5. PROGRAMMING REMOTE CONTROL

5.1.

Ensure the machine is plugged into the power supply with the power on.

5.2.

Set the main switch (1) to the ('I') position.

5.3.

Locate the detergent mode selection button (2) on the top section (18) indicated by the following symbol.

5.4.

Press and hold the detergent mode button until the indicator light above the mode selection buttons (2) illuminates.

5.5.

With the light still illuminated, press and hold the detergent mode button on the nozzle (10).

5.6.

When the light starts to flash the nozzle (10) is programmed to the machine. You should now be able to operate the detergent and

vacuum modes using the nozzle (10).

5.7.

If the light does not flash go back to step 5.4 and start again.

6. USING A CARTRIDGE FILTER

WARNING! Always disconnect the plug from the mains supply before removing the top section (18).

IMPORTANT: The filter is made of high quality paper designed to filter small particles of dust. We recommend that this filter be

used for dry vacuum only.

Original Language Version

fig.1

VMA915 Issue 6 (1) 23/06/20