Artillian 3pt Quick Hitch Adapter Instrucciones de instalación
Navegue en línea o descargue pdf Instrucciones de instalación para Adaptador Artillian 3pt Quick Hitch Adapter. Artillian 3pt Quick Hitch Adapter 2 páginas. For the artillian jdqa & jdpo pallet fork frames
Imprimir página1. Remove the fork tines from your Artillian frame.
2. Dangle the Tethered Lock Keys over the front side of the adapter plate.
3. Lift the adapter plate with the 3pt connection points facing away from the fork frame rails. The
away facing side will have the "hooks" that will mount on the rails of your fork frame.
4. Approach the fork frame at either end of the fork rails. Set a top hook of the adapter plate on the
upper fork rail, align the lower hook with the lower rail then carefully slide the adapter plate
completely on to the center of the fork frame. WATCH FOR PINCH POINTS AS YOU SLIDE THE
PLATE ON. See Fig 1
5. Once the plate is centered on the fork frame, install the two Lock Keys through the plate and
through the aligned slots in the fork rails. See Fig 2
© Artillian, LLC 2012
3pt Quick Hitch Adapter Installation
For the Artillian JDQA & JDPO Pallet Fork Frames
Please review these instructions before installing!
Caution – Close Fit
Watch for Pinching!!
Fig 1
Instructions
The Artillian 3pt Quick Hitch adapter turns your
Artillian pallet fork frame into a tool to attach 3pt
tractor implements to the front end loader of your
tractor, such as landscape rakes, plows, aerators,
1. (1) Adapter Plate
2. (2) Tethered lock keys
1
trenchers, etc.
Parts Included
IM‐5‐QHA
Rev. A, 05/08/2017