akkuteam VAS 5581 Manual de instrucciones - Página 3
Navegue en línea o descargue pdf Manual de instrucciones para Instrumentos de medida akkuteam VAS 5581. akkuteam VAS 5581 17 páginas. Hv measurement adapter
Imprimir página
Operating Instructions
HV Measurement Adapter VAS 5581
General
The unit was manufactured in accordance with the state of the art
and the recognized safety-technical regulations. However, risks
continue to exist when the unit is operated inappropriately or
misused, specifically for:
– death or bodily injury of the operator or others,
– the unit or other property of the operating entity,
– the efficient operation of the unit.
All personnel who are involved with commissioning, operating,
maintaining and servicing the unit must
– have the appropriate qualifications,
– have fully read and accurately follow these operating instructions.
The operating manual must be stored at the operating location
of the unit at all times. In addition to the operating manual, all
generally applicable and local accident prevention and environ-
mental protection regulations must be observed.
All safety and hazard labels on the unit
– must be legible
– must not be damaged
– must not be removed
– must not be concealed, taped over or painted over.
You can find the locations of the safety and hazard labels on the
unit in the "General Information" section of the unit operating
manual.
Malfunctions that compromise safety must be corrected before the
unit is turned on. This involves your personal safety!
www.akkuteam.de
4
Intended
The unit must only be used for the intended purposes.
uses
Any other uses are in violation of the intended uses.
The manufacturer is not liable for any losses and deficient or
defective work output resulting from such uses.
The intended uses also include
– having fully read and complying with the operating manual and
all safety and hazard instructions
– observing inspection and maintenance schedules
– observing all instructions by the battery and
vehicle manufacturer
Environmental
Operating or storing the unit outside of the indicated areas is a
conditions
violation of the intended uses. The manufacturer is not liable for
losses resulting from this.
Precise information about the approved environmental conditions
can be found in the accompanying technical specification sheet.
Power
Due to their power consumption, equipment with high power
connection
ratings can negatively influence the electrical power supply grid.
This can impact certain equipment types in the form of:
– connection restrictions
– requirements with respect to the maximum rated
grid impedance*)
– requirements with respect to minimum
short-circuit rating*)
*) respectively at the interface to the public utility grid
see technical specifications
5
V 1.0