djpower TOPCAT HF-90 Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Equipo para DJ djpower TOPCAT HF-90. djpower TOPCAT HF-90 13 páginas. Flame machine

Imprimir página
5.
OPERATION
5.1.

Preparing for Operation

Before operating the machine, please follow the below steps to prepare:
•
Before operation, please ensure that there are no flammable materials around the machine, and people and equipment should maintain
a certain safe distance. Safety distances for HF-210: At least 15m in all projection directions, at least 5m to the other sides of the device.
•
After checking that all the parts are intact and complete, position the machine on flat.
•
Please connect the communication line before the power is turned on, and ensure that the communication command is non-injected
and the device is in test mode.
•
Always connect the product to a grounded circuit. Before power on, make sure it is connected with the rated voltage
•
The operator should near the machine and be able to directly see the status, and immediately terminate the performance when there is
a danger. There should be a total AC power switch near the operator. When an abnormality occurs, the power should be disconnected
in time. This is the safest way to do this.
5.2.
On-device Control Panel
To access the control panel functions, use the four buttons located underneath the LCD display.
5.3.
On-device Control Mode & Operation
5.3.1.
Programming
•
Refer to the Menu Map to understand the menu options. The menu map shows the main level and a variable number of programming
levels for each option.
•
To go to the desired main level, press <MENU> repeatedly until the option shows on the display. This will take you to the first
programming level for that option.
•
To select an option or value within the current programming level, press <TIMER> < > or <VOLUME>< > until the option shows
on the display. If there is another programming level, you will see that first option, or you will see the selected value.
•
Press <MENU> repeatedly to switch menu pages.
•
Press <STOP> to return to the standby page.
5.3.2.
Menu Map
Starting Page
Standby Page
Working Status Page
Button
<MENU>
▲
▼
<ENTER>
Display
HF-90 V1.0
AC-230V 50Hz
Wait To Connect
P:0 V：12
Ready To Work
P:0 V：12
Function
Switch menu pages to select a function
Increases the numeric value of current function
Decreases the numeric value of current function
Switch between current menu page and Standby Page
Description
When the external trigger function is OFF, to
connect to DMX control, showing this page
Under DMX control, showing the DMX address
setting.
- 5 -
Parameter Range