Artis MS304 Manual del usuario - Página 2
Navegue en línea o descargue pdf Manual del usuario para Sistema de altavoces Artis MS304. Artis MS304 2 páginas. 2.1 ch multimedia speaker system
Imprimir página6. In FM mode, after finishing saving channel, press "PRESET" the number
on the LED will blink. This show you have selected the state of save
selected the state of save channel. Press "NEXT" or "PREV" you can
change the blinking number. Press "PLAY/PAUSE" you can choose the
channel which you saved before. Press the number "0-9" on the remote
control. You to choose the channel more faster. under FM function, press
the " ST-BY " or "
" button on the front panel and then press
"
" , "
", to change channel.
7. When entering into USB/SD mode. "NEXT" means next song; "PREV"
means previous song; "PLAY/PAUSE" means play/pause;pressing the
number "0-9" on the remote control, you can choose the corresponding
song.
8. VOL+/- means you can increase or decrease volume.
9. "TUNING-" means decrease the frequency of channel selection. Press
"TUNING-" for a long time means decrease the frequency of channel
selection continuously
10. " TUNING+"means increase the frequency of channel selection. Press
"TUNING+" for a long time means increase the frequency of channel
selection continuously.
11. "PLAY/PAUSE" means play/pause for USB/SD/BT.
12. "PREV" means previous song for USB/SD/BT.
13. "NEXT" means next song for USB/SD/BT.
14. Press "SOURCE" buttons on the remote to convert to BT input
mode, LED display right bottom start to flashing (2 seconds) to search the
BT device. Turn on your mobile BT device and search the device name "BT
SPEAKER", paired them well. When you have successfully paired
your mobile to the speaker system, the LED right bottom stop flashing.
When start to play your mobile music, the LED flashed every one second.
The functions as "PREVIOUS/NEXT", "PLAY/PAUSE", can operate via the
front panel. On BL mode, when connecting with mobile, press "
seconds, BT function can be force-disconnected .
System connection diagram
L
Connect the audio sources:
• Connect the 3.5" stereo cable to the input of the subwoofer,Connect the
3.5 stereo input jack into output of the audio sources,such as MP3,MP4,
walkman,computer etc.
• Power on system, adjust the master volume to the suitable level. Adjust
"VOL" to the suitable to meet your different requitement.
SPEAKER TERMINALS
Connect the left & right channel satellite to 2.1 speaker output terminals.
* Do not leave objects generating magnetism near the speakers.
Rear panel:
• ANTENNA
• AUX/DVD INPUT Connect to sound sources such as computer, CD
Player,MP3,etc.
• Output: Connect the satellite speakers.
" for 3
• AC IN: AC Power cord
In use please pay attention to the following items:
R
*if the remote control cannot function, it is because the battery of
remote control has been used up. thank you.
(1)
(2)
(3)
(4)