Clemas & Co TENNANT F3 Manual del usuario - Página 3
Navegue en línea o descargue pdf Manual del usuario para Sander Clemas & Co TENNANT F3. Clemas & Co TENNANT F3 6 páginas. Polisher
Imprimir páginaF3 / F8 / F12
Single disc machine
Machine components
1 - Handle bar
2 - Brush motor switch
3 - Housing of top shaft element
4 - Switch lock
5 - Shaft adjustment handle
6 - Shaft adjustment unit
7 - Bar
8 - Cable hook
TABLE OF CONTENTS
Machine components..............................
Accessories............... ...........................
Safety instructions..................................
Machine assembly and operation.............
Servicing instructions..............................
Storing machine.....................................
Trouble shooting....................................
Technical specifications..........................
Parts list F3............................................
Parts list F8...........................................
Parts list F12..........................................
Parts list for Accessories.........................
PROTECT THE ENVIRONMENT
Please dispose of packaging materials
and old machine components in a safe
environmentally way according to your
local waste disposal regulations.
Always remember to recycle.
Safety instructions
WARNING: This manual must be read and
understood before operating or servicing machine.
This machine is intended for commercial use. It's designed exclusively
to scrub hard floors in an indoor environment and is not constructed for
any other use. Only use recommended pads/brushes and cleaning
agents.
These operating instructions are intended for operating staff.
1. Please familiarize yourself with the instructions and recommenda-
tions contained in these operating instructions before setting up,
operating and servicing the machine.
2. You will then have full control over the machine and use it effi-
ciently. The care and maintenance described in these operating in-
structions are in the interests of your own safety and preserve the
machine's value.
3. The manufacturer accepts no liability for personal injury or damage
to property due to the incorrect use of this machine.
9 - Wheels
10 - Motor head
11 - Brush
12 - Outlet hose
13 - Solution tank
14 - Tank holder
15 - Tank lever
16 - Water connector
2
3
3
4
5
5
6
6
15
19
23
27
- 3 -
Home
Find...
Go To..
Accessories
11 - Scrubbing brush for F8/F3 low speed
Polishing brush for F12/F8 high speed
13 - Solution tank for F8/F3 low speed
17 - Drive plate for F8/F3 low speed
Drive plate for F12/F8 high speed flexible
n/s Spray unit for F12/F8 high speed
Vacuumunit
Vacuumring 430mm
8kg extra weight F3/F8
8kg extra weight F12
This warning alert symbol that is used
throughout this manual is to warn of hazards or un-
safe practices. Failure to follow these may cause
electric shock, fire or explosion which could result
in severe personal injury or death.
Before operating the single-disc machine,
please read these instructions carefully and keep
them handy at all times.
The single-disc machine may only be used by per-
sons trained in its use and explicitly entrusted with
its operation.
WARNING:
Fire or Explosion Hazard. Never use flammable liq-
uids or operate machine in or near flammable liq-
uids, vapours or combustible dusts.
This machine is not equipped with an explosion
proof motor. The electric motor will spark when
powered on which could cause a flash fire or explo-
sion if machine is used in an area where flammable
vapours/liquids or combustible dusts are present.
WARNING:
Electrical Hazard. Never operate machine with dam-
aged power supply cable. Do not modify plug. Un-
plug cable before servicing machine.
If the power supply cable is damaged or broken, it
must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to
avoid a hazard.
General remarks
The operation of the single-disc machine is subject to the currently
valid national regulations.
It is essential to observe not only the operating instructions and the
binding regulations on accident prevention valid in the country of use,
but also the generally acknowledged rules for safe and correct working
procedures. No methods involving safety risks must be used.
EN
Part. No.
9002236
9002200
9002256
9002191
9002193
9002262
9002288
9002289
9002304
9002303