DJTECHTOOLS Midi Fighter 3D Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Media Converter DJTECHTOOLS Midi Fighter 3D. DJTECHTOOLS Midi Fighter 3D 19 páginas.

4 Banks Mode

The Midi Fighter 3D defaults to banked mode. In this mode the 16 arcade buttons send

different notes depending on which bank is currently selected. All arcade button notes are

sent on channel 3. All other messages are sent on channels 4 - 6.

The bank selection can be changed by pushing the desired bank button, the LED of the

currently selected bank will glow white. In Traktor mode the banks buttons also send midi

signal as detailed in the diagram below.

The 6 side buttons are ﬁxed and send the same notes regardless of which bank is selected

unless the option "Bank Side Buttons" is enabled in the Midi Fighter Utility.

When four banks is enabled there is no capability to change the state of the LEDs. In this

mode any MIDI out message will force the device to switch the to the bank selected by the

relevant button.

4 Banks Mode Disabled

If you do not wish to use banks when creating your own midi mapping you can set the "Four

Banks Mode" to "Disabled" using the Midi Fighter Utility software. When four banks mode is

disabled the arcade buttons will send the same MIDI data regardless of the state of the bank

buttons.

Four Banks Disabled Hold

In this mode the bank buttons behave like any normal button, sending a note on when

held, and a note off when released. By sending a MIDI out message with a non-zero

velocity on the same note as the MIDI in for any of the bank buttons you can turn the LED

on, sending a 0 velocity or note off will turn this LED off.

Four Banks Disabled Toggle

In this mode the banks buttons have toggle functionality, changing state each time they

are pressed then released. In this mode there is no control of the LED as the LED will

always reﬂects the state of the toggle.

Advanced Bank Control

It is also possible to use MIDI to read and set the currently selected bank.

When the virtual bank selection changes the Midi Fighter 3D sends a Note On to indicate a

new bank has been selected. It will also send a Note Off to indicate the previously selected

bank is no longer active. By default the bank selection notes are sent on MIDI Channel 4.

I.e. When changing from Bank 1 to Bank 2 the Midi Fighter will send a Ch4 C-1 Note Off

followed by a Ch4 C#-1 Note On.

By sending Note On messages to the MIDI Fighter 3D it is also possible to force it to

automatically change to a speciﬁc bank.

Bank Change Notes

Bank 1 | Ch4 C-1

Bank 2 | Ch4 C#-1

Bank 3 | Ch4 D-1

Bank 4 | Ch4 D#-1

! 6