Altronix eBridge1PCRX Manual de instalación - Página 2
Navegue en línea o descargue pdf Manual de instalación para Receptor Altronix eBridge1PCRX. Altronix eBridge1PCRX 4 páginas. Ip and poe+ over coax solution ebridge1pcrx receiver and ebridge1pctx hardened transceiver kit
También para Altronix eBridge1PCRX: Manual de instalación (4 páginas)
Imprimir página
Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes and
authorities having jurisdiction. Wiring should be UL Listed and/or Recognized wire suitable for the application.
eBridge1PCTX and eBridge1PCRX are not intended to be connected to outside plant leads and should be installed
indoors within the protected premises. eBridge1PCTX and eBridge1PCRX are intended for indoor use only.
1. eBridge1PCRX installation:
a. Secure unit to desired mounting surface with a proper fastening device utilizing the unit's mounting hole
(Fig. 2a, pg. 3). Unit should be mounted in proximity to ethernet switch/network, NVR or video server.
b. Connect 24VDC to 56VDC Class 2 power supply to wire insert connector [Power --- Input +] (polarity observed)
(Fig. 1, pg. 2). Use 22AWG-16AWG wire for this connection.
c. Connect structured cable from ethernet switch/NVR (network video server) to RJ45 jack marked [10/100BaseT]
(Fig. 2, pg. 3).
d. Connect Coax cable to BNC connector marked [Coax] (Fig. 2, pg. 3).
2. eBridge1PCTX installation:
a. Secure unit to desired mounting surface with a proper fastening device utilizing the case's mounting hole
(Fig. 2a, pg. 3). Unit should be mounted in proximity of camera/device.
b. Connect structured cable from IP camera/device to RJ45 jack marked [10/100BaseT] (Fig. 2, pg. 3).
c. Connect Coax cable to BNC connector marked [Coax] (Fig. 2, pg. 3).
Note: The eBridge1PCRTX is designed to accommodate Megapixel, HD720, HD1080 and VGA (SD) cameras. It is
important to note that some high resolution and high frame rate cameras may demand faster headend processing ability,
such as a PC graphics card to present a quality image. If the headend processing equipment is insufficient in speed, the
image may show pixelation and latency. It is advisable to pretest system if unsure. Alternatively, frame rate and resolu-
tion may be reduced to accommodate system equipment.
Parameter
Description
Connections
BNC for Coax link. RJ45 for ethernet link.
Input power
24VDC/1,500mA, 56VDC/900mA
requirements
Blue: Coax Link.
Yellow (RJ45 connector): On - Link, Off - No Link, Blinking - Activity.
Indicators
Green (RJ45 connector): On - 100 Base-TX, Off - 10 Base-T.
Green: Power.
Operating Ambient Temperature: UL60950-1
eBridge1PCRX:
15W: -- 4ºF to 113ºF (--20ºC to +45ºC).
30W for 24VDC: -- 4ºF to 98.6ºF (--20ºC to +37ºC).
Environmental
30W for 48VDC: -- 4ºF to 113ºF (-- 20ºC to +45ºC).
Conditions
eBridge1PCTX: -- 4ºF to 120.2ºF (--20ºC to +49ºC).
Relative humidity: 85%, +/ ---5%
Storage Temperature: -- 4º to 158ºF (---20º to 70ºC) Storage
Operating Altitude: --1000 to 6,561.679 ft. (--304.8 to 2000m).
Regulatory
UL/CUL Listed for Information Technology Equipment (UL 60950-1).
Compliance
CE approved. C-Tick compliant.
Weights (approx.) Product: 5.1 oz. (0.144 kg), Shipping: 7.76 oz. (0.22 kg)
Fig. 1
Structured
Cable from
Ethernet Switch/NVR
Coax
Cable from
eBridge1PCT
- 2 -
Installation Instructions:
Technical Specifications:
eBridge1PCRX
Blue LED indicates
Coax Connection
Green LED
indicates
Power
Structured
24VDC-56VDC
Cable from
--- Input +
IP Camera/Device
Coax
Yellow LED
Cable from
indicates
eBridge1PCR
PoE
eBridge1PCTX
Green LED
Coax Connection
eBridge1PCRX/PCTX
indicates
Power
Blue LED
indicates