DK-TEC LS6000C Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Media Converter DK-TEC LS6000C. DK-TEC LS6000C 14 páginas. Wood splitters 6 and 8 tons

SAFETY INSTRUCTIONS

In general:

For safety reasons, the safety instructions mentioned in this user manual and the instructions on the

machine regarding operation, maintenance and repair must be observed and followed.

Operating staff:

Risks may be associated with using clover. Therefore, only trained and experienced

persons may handle and work with the machine. The operator must wear close-fitting

clothing and protective shoes.

Persons under the age of 18 may not work with the tree trimmer. However, persons over

the age of 16 can work with the woodcutter for learning purposes if supervised by a

professional.

Workplace:

To ensure safe tree splitting, it is necessary that the workplace is level and enables stability in the

work as well as sufficient free movement. All obstacles must be removed from access paths

when transporting the clover. Adequate lighting must be available at the workplace.

Work preparation:

The electric power supply must be disconnected when repairing or maintaining the clover. This is

done by removing the plug from the socket and pressing the red button. Interruption of the

electrical power supply by turning the switch to OFF is not enough!

The tree cleaver is always supplied with hardened cleaver blades. If, when using the machine,

there is minor damage to the knife edge after splitting wood containing invisible foreign elements,

e.g. out of concrete, steel, etc., it must be removed with a file or sanded off. By keeping the

cleaver sharp at all times, increases operation.

TIP: Lubricate the splitting knife with grease from time to time (for problematic wood).