DK-TEC SAVCDH Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Cortacésped DK-TEC SAVCDH. DK-TEC SAVCDH 15 páginas. Flail mower

DK-TEC SAVCDH Manual del usuario
Read and understand the contents of this instruction manual before using the product. Lack of
safety and correct operation can cause damage to the operator or bystanders, as well as to the
product.
This manual will give you an overview of the safety precautions, as well as tips on how to get
started with your new product.
Security
The user must be familiar with all functions of this product before operation.
Keep hands and feet away from any moving parts.
Wear protective clothing and equipment appropriate for the job. Avoid loose items and loose
clothing.
Never stand between the vehicle and the product.
Keep people who are not operating the product away from the work area.
Never have passengers on the product.
Never allow children to operate this product.
Inspect the product and ensure that all parts are in good shape and correctly fitted before
and after use. If a problem is found, the problem must be solved before working with the
product.
Comply with the laws and regulations that apply in the local area when transporting on public
roads.
The maximum speed for driving with tools is 20 km/h in many places. Never drive at a
speed that does not allow full control, steering and stopping.
Some terrains require a lower speed.
Store the product in an area where children do not normally play. Make sure the product is
secured,
so that it cannot tip over, move or fall on anyone.
Make sure you have a phone number for a doctor, ambulance, hospital and fire
department near the phone in case of an emergency.
Driving the product safely requires full attention from the consumer, so avoid listening to the
radio/music with headphones or the like when working with this product, as it can distract
attention.
Get started with your new product
The product must never be connected to the vehicle; eg. tractor, skid steer, ATV, car etc.
except when the vehicle is; braked, stopped and the ignition key is in the off position.
When the product is connected, it must be checked that all screens and safety locks etc.
are fitted and intact. Defective safety parts must be replaced with new original parts - to
maintain safety and retain the right to claim.
Give yourself time to get to know the product well, start slowly and become familiar with the
product's use and limitations.
Useful information
For the gearbox:
If there is a need to top up oil in the gearbox, use a gear oil quality 80/90

1. Introduction

1