ALTUS Du351 Manual del producto - Página 5
Navegue en línea o descargue pdf Manual del producto para Controlador ALTUS Du351. ALTUS Du351 18 páginas.
Imprimir páginaDuo Series
Doc. Code: CE113100
Transistor Digital Outputs (DU350)
Number of common outputs
Maximum current per point
Output type
Switching time
Maximum switching frequency
with load
Status indication
Protection
Operation voltage
Insulation
Output impedance
Terminal block configuration
Notes
Maximum current per point: the transistor output has no overload protection. If output protection is necessary, an external
fuse must be used with the product.
Terminal block configuration: the insulation group 0 has two fast transistor outputs (Q00 and Q01).
Altus S. A.
DU350
14 transistor digital outputs divided into 2 insulation groups:
Q02 to Q07 – 6 outputs – Group 0
Q10 to Q17 – 8 outputs – Group 1
0.5 A
Transistor, source type
600 s
250 Hz with minimum external load of 12500
Can be accessed at product standard screens
TVS diode in all transistor outputs
10 to 30 Vdc
2000 Vac for one minute between each output transistor group
2000 Vac for one minute between output transistor group and logic
circuit
500 m
Transistor digital outputs are divided into 2 connectors (insulation
groups). Each connector is made up of a terminal block for each
output, a terminal block to the common contact (supply) and a 0 V
reference terminal block.
Q02 to Q07 – transistor output 2 to 7 of insulation group 0
Q10 to Q17 – transistor output 0 to 7 of insulation group 1
C5 – reference (0 V) insulation group 0 (shared with fast outputs)
C6 – power supply of insulation group 0 (shared with fast outputs)
(maximum 30 Vdc)
C7 – reference (0 V) insulation group 1
C8 – power supply of insulation group 1 (maximum 30 Vdc)
DU350, DU351
Revision: G
5