CUSTOM ULTRASONICS 20000 Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Almacenamiento CUSTOM ULTRASONICS 20000. CUSTOM ULTRASONICS 20000 7 páginas. Endoscope storage cabinet
También para CUSTOM ULTRASONICS 20000: Manual del usuario (11 páginas)

Imprimir página
CUSTOM ULTRASONICS, INC.
P
LACEMENT OF THE
Place the control head of each endoscope into the holding bracket, and hang it vertically. Each of
the four brackets is designed to hold one or two scopes (scope model dependent).
Each endoscope channel is attached to the air purge manifold via an adapter. The manufacturer and
model type of the endoscope determines the type of adapters that are necessary to use.
Remove any adapters that are not attached to an endoscope, making sure to always leave at least one
adapter plugged into the manifold at all times.
Model 20000 Endoscope Storage Cabinet
For the
Ultrasonics, Inc.
Customer Service department.
The operating buttons for the endoscopes are placed in the holding compartment located on the
interior side of the
Model 20000 Endoscope Storage Cabinet
C
:
AUTION
One adapter must remain in the adapter manifold at all times to prevent damage to the air
pump.
Make certain the endoscopes are not hanging out of the cabinet, which could result in
damage to the endoscope and/or cabinet when the door is closed.
SHEET
4 OF 7
E
NDOSCOPE INTO THE
REVISION
A
S
C
TORAGE
ABINET
manifold attachments, contact
door.
M
20000 E
ODEL
NDOSCOPE
S
C
TORAGE
ABINET
O
'
M
PERATOR
S
ANUAL
:
Custom