Altusen ALTUSEN CC1000 Manual de inicio rápido

Navegue en línea o descargue pdf Manual de inicio rápido para Unidad de control Altusen ALTUSEN CC1000. Altusen ALTUSEN CC1000 2 páginas. Control center over the net

Imprimir página

CC1000 Control Center over the NET Quick Start Guide

International Co., Ltd.

trademarks are the property of their respective owners.

This product is ROHS compliant

Package Contents

• 1

CC1000 USB Authentication Key

• 1

User Manual

• 1

USB Extension Bracket

• 1

Quick Start Guide

• 2

USB Cables (1 External; 1 Internal)

• 1

Registration Card

• 1

Software CD

Note: There are two versions of the CC1000: A Windows Version, and a Java Version

(includes Java for Windows and Java for Linux). You cannot install both versions.

You must choose between the Windows version and the Java version.

2-1

System Requirements

The requirements for the computers running the Windows version of the CC1000 components are

given in the table below:

Component

PC Requirements

• Windows Server Family 1 with IIS 5.0/6.0 and higher; Certificate

CC1000 Manager

Services (CA) 2 , and SNMP configured

• At least one network card installed - two are recommended

• A USB host controller and USB Type A (F) port installed so that

it can accept the CC1000 USB authentication key

Windows 2000 / XP / or Windows Server Family 1 with Microsoft

CC1000 Log Server

Jet Database

Note: This component can either be installed on a PC running

one of the other components, or on an independent PC.

CC1000 Authenticaton Server Windows Server Family 1 with Active Directory (AD); and

Certificate Services (CA) configured

Note:This component can either be installed on the PC that the

CC1000 Manager is on, or on an independent PC.

CC1000 Administrator Utility Windows 2000 / XP / or Windows Server Family

Note:This component can either be installed on a PC running one

of the other components, or on an independent PC.

2-2

System Requirements

(Continues from 2-1)

Note:

1. For the Windows Server Family you can use any of the following Windows operating systems:

Windows 2000 Server, Windows 2000 Advanced Server, Windows Server 2003 Standard

Edition, Windows Server 2003 Small Business Edition, or Windows Server 2003 Enterprise

Edition.

2. All PCs must be have all of the latest updates from the Microsoft Update Website installed.

3. All ALTUSEN "Over the NET™" and ATEN "On the NET™" products must be at a firmware

level that contains the CC Management function, and the CC Management function must be

enabled. Download and install the latest version of the relevant firmware from our website, if

necessary.

The software requirements for the computers running the Java version of the CC1000 components

are as follows:

• OS: Windows 2000 / XP / Server Family, or Linux

• Java: SDK 1.4.2 or higher

• OpenLDAP: 2.2.29 or higher (Windows) or 2.1.22 or higher (Linux)

USB Authentication Key Bracket Installation

For security purposes, the USB Authentication Key can be installed inside the case. To do so, refer

to the diagram below as you perform the following steps:

External Cable Installation

1. Install the USB key bracket that came with your CC1000 package into one of the computer's

expansion slot openings.

2. Plug the USB Authentication Key into the USB socket on the bracket.

3. Plug the bracket cable into one of the computer's USB ports.

Internal Cable Installation

1. Perform steps 1 and 2 as above period

2. Plug one end of the USB internal connector cable onto the bracket.

Note: The red wire goes to pin 1 (at the bottom of the bracket)

3. Plug the other end of the cable into a USB connector on the mainboard – (see your mainboard

manual for the connector's location)

(Continues on 2-2)

4-1

Windows Version Installation

1.Install and set up Windows Server; making sure to install AD (Active Directory), CA (Certificate

Authority), and IIS (Internet Information Services).

2. Install and set up the CC1000 server software - making sure that IIS and SNMP have been

properly configured, and that the USB key has been plugged into the computer running the

CC1000 Server software.

3. Launch the CC1000 Log Server. Configuration of the Log Server must be performed the first time

that the program is launched.

Note: If the Log Server is installed on the same machine as the CC1000 Manager, you don't

have to launch the Log Server. It will launch automatically when you launch the CC1000

Manager.

4. Launch the CC1000 Manager. Configuration of the CC1000 Manager must be performed the first

time that the program is launched.

5. Launch the CC1000 Administrator Utility to add and configure devices and users. These

procedures must be performed the first time the program is launched, and whenever device or

user information changes.

6. Make sure that ANMS (Authentication Network Management Service) support has been properly

set up in your ALTUSEN/ATEN IP devices.

(see flow chart in next panel)

4-2

Windows Version Installation – Flow Chart

Installation Overview

Note: 1. Installation of Windows updates is optional, but strongly recommended.

2. It may be necessary to reboot between the procedures.