ArtiTeq MICRO GRIP Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Luminaria ArtiTeq MICRO GRIP. ArtiTeq MICRO GRIP 9 páginas.

Imprimir página
EN
MICRO GRIP 1 mm / 2 mm
INSTRUCTION MANUAL
MICRO GRIP TYPES AND SPECIFICATIONS
Max. load in kg
Artiteq 1 mm perlon
Artiteq 1 mm
steelwire
Artiteq 2 mm perlon
Artiteq 2 mm
steelwire
Artiteq 2 mm rod white

GENERAL SAFETY GUIDELINES

Do not exceed the maximum loads shown in table 1.
»
Only fit the Micro Grip to Artiteq cables/rods as shown in table 1.
»
Only use the Micro Grip in interior spaces with a normal indoor climate (10 ... 40 °C , 40 ... 70 % relative
»
humidity).
Do not expose the Micro Grip to chemicals/vapours such as solvents, chlorine fumes, steam, etc.
»
Do not use damaged Micro Grip fasteners.
»
Do not fit the Micro Grip to damaged cables/rods.
»
Regularly check the Micro Grip and the wire/rod for damage.
»
Stop using damaged products and replace them (see "Artiteq warranty and replacement").
»
Only use the Micro Grip for hanging frames/panels to a suspension system against wall.
»
Do not use the Micro Grip above areas where people may be located (e.g. freely hanging in a room or above a
»
passageway).
When making adjustments, remove the frame from the Micro Grip or support it so that no weight is hanging
»
on the Micro Grip.
Never press the control button if there is weight hanging on the Micro Grip.
»
Always leave at least 5 cm of cable/rod protruding under the fastener.
»
MICRO GRIP
1 mm
MICRO GRIP
2 mm
Micro Grip 1 mm
5 kg
10 kg
x
x
x
MICRO GRIP
LOCK 2 mm
Micro Grip 2 mm
x
x
20 kg
20 kg
20 kg
Micro Grip Lock 2
mm
x
x
20 kg
20 kg
20 kg
table 1