Alu Rehab NETTI DYNAMIC BASE Manual - Página 9

Navegue en línea o descargue pdf Manual para Silla de ruedas Alu Rehab NETTI DYNAMIC BASE. Alu Rehab NETTI DYNAMIC BASE 16 páginas.

Imprimir página

REFURBISHMENT PROCEDURE

Before working on the wheelchair it is advisable to place the wheelchair on a raised table or bench giv-

ing an ergonomically correct position, avoiding any unnecessary lift. Use recommended, high quality

tools and refer to the User Manual that can be downloaded from our home page www.My-Netti.com.

Clean the Wheelchair - see Cleaning Procedure Page

4, difficult stains remaining after the cleaning process

can be removed with methylated spirit. For oiling or

greasing - remove cushions, head support, leg sup-

ports, main wheels, front castors, arm supports and

any other accessories. Tilt the wheelchair rearwards

on to the anti tip tubes.

FRAME :

Check the frame for deformations, breakages, dam-

age, abrasions, and missing screws, bolts and nuts.

Worn parts must be replaced, and oiled if necessary.

Deformed frame and parts must be scrapped.

MAIN WHEEL:

Main wheels and push rims can be cleaned with

soapy water or methylated spirit. Clean the rims and

check tyres for damage and cracks, replace if neces-

sary. Oil the quick

release/main wheel axle. Check

that the

quick release locks the main wheel when

mounted on the wheelchair. This is done by pulling

the main wheel after mounting making sure the

wheel is firmly attached.

FRONT CASTORS AND FRONT FORKS:

Clean the front forks with methylated spirit.

Oil the quick release axle and check for play.

If there is play in the quick release axle, remove it,

clean it with methylated spirit and apply Thread

Lock glue to secure the front fork within the bearing

house.

Dismantle the front castors from the front forks for

cleaning with methylated spirit and check for play in

the bearing. Replace the front castors if worn.

Check that the quick release locks the front castor

when mounted on the wheelchair (see User Manual

for further details).

For correct manoeuvring check that the bearing

house is mounted vertical in relation to the ground

(see User Manual for further details).

Washing manual for manual wheelchairs

Version: 2022-05

Quick release

Main wheel

Bearing house

Eccentric bolt

Front fork

Front castors

Bearing

house

Push ring

Ball race

Quick release

Wheel axle