Alu Rehab Netti 4U comfort CED Manual - Página 13
Navegue en línea o descargue pdf Manual para Equipamiento médico Alu Rehab Netti 4U comfort CED. Alu Rehab Netti 4U comfort CED 16 páginas.
Imprimir página
Function
Model
Bearing
All models except
housing
Netti 4U FAMILY
Front
All wheelchair models
castors
Main wheel
All wheelchair models
Brakes
All wheelchair models
Extension
All wheelchair models
piece
leg support
Leg support
Netti III family
angle
Netti S,
adjustable
Netti 4U family
Netti Dynamic family
Leg support
Netti III family
universal
Netti S,
Netti 4U family
Netti Dynamic family
Anti tip tubes
All wheelchair models
Directional
All wheelchair models
stability
Washing manual for manual wheelchairs
Version: 2022-05
Test/check
Ensure the bearing housing is adjusted in posi-
tion vertical to the horizontal ground.
The front castors quick release should operate
freely on and off and lock them in the secure
position. Check there is minimum free play in
the quick release lock. Check both front castors
are mounted in the same hole position on the
front forks.
Check that the main wheels lock securely and
that the quick release operates freely on and
off. Check there is minimum free play in the
quick release lock. Check both main wheels
are mounted in the same hole position in the
wheel-frame bracket. There should be no free
play in the push rims.
Check that the brakes are equally adjusted on
both sides and that they lock the main wheels
securely with as little required force as possible.
The extension piece should be
securely fastened and equally adjusted
on both sides.
Check if the angle lock locks into desired angles
and the leg support is easy to mount and
remove. There should be no free play in the
locking bracket. Check that it is easy to move
and fix the length adjustment. The calf supports
should be equal adjusted on both sides. The
knee upholstery should be clean.
Check the connection between the leg support
and the frame; that it is easy to mount and re-
move them. There should be no free play in the
locking bracket. Check that it is easy to move
and fix the length adjustment
Check that the adjustment is equal on both
sides and that the position is correct relative
to the main wheels. Check engagement and
disengagement of the anti tip tubes up and
down. Check that the anti tip tubes are correctly
labelled.
Push the wheelchair with equal power on both
sides of the push bar, allow the wheelchair to
roll forward freely. The wheelchair should roll
forwards in a straight line, if not, adjust the front
castors and main wheels, (see User Manual).
Done/OK
1 3