Alula RE657WF-R Manual - Página 5

Navegue en línea o descargue pdf Manual para Panel táctil Alula RE657WF-R. Alula RE657WF-R 12 páginas. Flat mount touchpad

Splice

Power Transformer

4. Pull wire from touchpad to AC outlet. If replacing an existing touchpad, existing wiring can

be used; however, new touchpad must be powered by supplied 12V DC power transformer.

Do not power from existing panel.

5. Connect wire to provided power transformer.

NOTE: Power Converter must be powered by supplied 12V DC Power Transformer. Do not

power from existing panel or other power supply.

6. Splice power converter wires to wires pulled from AC outlet.

7. Ensure correct polarity. Red wire must connect to +12V of power transformer.

8. Plug USB connector into the display.

9. Place power converter and excess wire inside the wall.

10. Snap the display into the back plastic (ensure camera is on the left side).

11. Align the front cover and snap into place.

12. Plug in the Power Transformer and ensure the display lights up. If display does not light up,

unplug power transformer and verify wire polarity.

Display

MAXIMUM WIRE LENGTH BETWEEN POWER

WIRE GAUGE

#24

#22

#20

#18

#16

Power Transformer

See table below for Max Wire Length

TRANSFORMER AND TOUCHPAD

Up to 50 feet

Up to 75 feet

Up to 125 feet

Up to 200 feet

Up to 300 feet

Power Converter

USB Connector