Alula RE667 Manual

Navegue en línea o descargue pdf Manual para Panel táctil Alula RE667. Alula RE667 12 páginas. Slimline touchpad
También para Alula RE667: Manual (13 páginas), Manual (12 páginas)

Imprimir página

Connect Family

The RE667 Slimline Touchpad

controlling the Connect+ security system. It is AC powered and

communicates with the panel wirelessly.

Features

• Vibrant 7'' Android tablet display

• Provides local control of security and automation functionality

• Wall or table mounted

• Encrypted, Connect+ enabled, battery-backed Wi-Fi™ connection

Installation Overview

1. Confirm the panel has a Wi-Fi DeviceLink card installed if using with Connect+.

Installing the Wi-Fi DeviceLink Card

• Disconnect the panel's AC power and backup

battery.

• Install the Wi-Fi DeviceLink card in Slot 2 by

carefully aligning the nylon retention posts and

the 8-pin connector while pushing the card

firmly until all posts are fully seated.

• Reconnect the panel's AC power and backup

battery.

• Verify the Wi-Fi card LEDs are on.

2. Choose a mounting location. Touchpad can be mounted on a wall or tabletop.

3. Verify signal strength at the desired location before mounting it permanently.

Verifying Signal Strength

1. Make sure the panel is powered and the Wi-Fi DeviceLink card is installed.

2. Power the Touchpad by applying AC power.

3. Select the "Connect" option to see the available networks. If the "Connect" option is

not available, press "Setup" then "Factory Default".

4. If the signal strength displayed is less than 35, relocate Touchpad or Connect+ panel. If

neither options are available, install an RE621 Touchpad Range Extender.

RE667 Slimline Touchpad

Connect+

is an intuitive interface for

Encrypted

™

AC Power

Input

Slot 2

Backup

Battery