Aluma Tower Company TM61WA80-EB4S8 Manual de instrucciones - Página 3
Navegue en línea o descargue pdf Manual de instrucciones para Vehículo utilitario Aluma Tower Company TM61WA80-EB4S8. Aluma Tower Company TM61WA80-EB4S8 12 páginas. Tower setup with guy wires includes guying to outriggers
Imprimir página
⇒ ALWAYS insure your tow vehicle and hitch capacity are suitable for the
⇒ NEVER overload your trailer or the tongue of your trailer. The GVWR noted
⇒ ALWAYS evenly distribute your load to maintain safe handling conditions
⇒ ALWAYS maintain the proper tire pressure according to the specification
⇒ NEVER tow the trailer with the outrigger jacks in place. Remove them and
⇒ BEFORE transporting trailer/tower check to see that both, the tower hold
⇒ WHEN transporting trailer and tower, drive within the speed limits and do not
Getting Ready to Transport
After hooking up the trailer to the tow vehicle, fully retract the front tongue jack and lock
it into the travel position (see Fig. 1A or 1B).
Fig. 1A Tongue Jack Positions
Attach the hooks on the safety chains to the tow vehicle frame. Be sure to cross the
chains under the coupler and leave enough slack for turning (see Fig.2). Hook up the
trailer lights by plugging the connector into the receptacle on the tow vehicle. Check all
lights (Brake, Stop, and Running) to see that they are functioning properly. If using
electric brakes, check to see that they are properly connected and that the brake controller
is in proper working order. Next, hook up the small wire cable that operates the
breakaway brake control (see Fig. 3).
2/13/2012
coupler height as needed.
trailer you are towing. These items must be rated according to the GVWR on
the V.I.N. decal on the front of your trailer tower unit.
on your V.I.N. decal is the maximum loaded weight of your trailer tower unit.
when towing your trailer tower unit (see "Weight Distribution" notice)
decal located on the front of your trailer tower unit
stow on rear frame or in storage box.
down cable and the "Red Strap" at the rear bottom end of the tower are in
place and secure.
exceed 55MPH.
Fig. 1B Dropleg Tongue Jack Positions
Page 2
TRAILER TOWER SETUP INSTRUCTIONS-GUYED TO OUTRIGGERS