Alunar R100-01 Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Impresoras 3D Alunar R100-01. Alunar R100-01 11 páginas. Lesser alunar 3d printers

Alunar 3D Printers

C. After temperature is getting to 220/220, press "E1↓" and Stop until PLA is

extruded. Clean the plant and nozzle, then you can enjoy your printing.

3.3 Printing from SD Card

Insert the SD card (there should be some .gcode files in SD card).

Back to Start Screen, press PRINT" PRINT", choose .gcode files that you want to print.

Press "Yes" to confirm. You can "Pause" or "Stop" printing. More parameter can be

adjusted in "More Function", such as printing speed, extrude etc. If you stop printing,

you can choose to save the breakpoint, and print from the breakpoint to continue.

Notice: Please make sure the distance between the nozzle and plate is suitable (as

the thickness of 2 A4 paper). Otherwise, the filament cannot stick or stick too tightly

to take off.