DKT Comega forsete-ii series Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Hardware de red DKT Comega forsete-ii series. DKT Comega forsete-ii series 12 páginas. Cpe

configuration of snmp values

SNMP feature will be supported in a future release.

The following SNMP values can be set by the configuration file:

SysContact the administrate contact for the network

echo "syscontact [email protected]" >>

SysLocation for the location of the system

echo "syslocation somewhere" >> /etc/snmp/snmpd.local.conf

SysName the name of the system e.g the customer identification

echo "sysname customerXYZ" >> /etc/snmp/snmpd.local.conf

Syslog feature will be supported in a future release.

Support for remote logging via syslog (RFC 3164)

To start syslog, enter the following line in your configuration file

syslogd [-l <log level>] -R <Remote server IP>

The syslog daemon sends logging information in UDP packets - port 514.

If all IP addresses are handled by the DHCP server, then there is also a way that the syslog daemon may

be started by the DHCP client:

echo "-O logsrv" > /tmp/dhcp_requests.txt

/etc/init.d/udhcpc restart

The daemon will be started by the DHCP client if the log server parameter (DHCP option 7) is received in

the DHCP response.

You may control which extra DHCP options that are requested in DHCP option 55. It is done by creating a

/tmp/dhcp_requests.txt

file

The format of the line is:

-O <option name> [-O <option name>] ...

The following values for

Name

dns

logsrv

hostname

domain

serverid

/etc/snmp/snmpd.local.conf

containing just one line with a list of request commands to the DHCP client.

are currently supported:

DHCP Option

Description

Domain name server IP

Log server IP address

Hostname of the box

Domain name

DHCP server identifier