DLab Thermo Control HC110-Pro Manual del usuario - Página 13
Navegue en línea o descargue pdf Manual del usuario para Equipos de laboratorio DLab Thermo Control HC110-Pro. DLab Thermo Control HC110-Pro 19 páginas.
Imprimir página
5.3.3 Program with Saving mode
Programming method is similar with Multiple Step
without Saving mode. After the programming
complete, long push the adjustable knob, program
name characters flash (refer to the red part in
below figure). Rotate the Adjustable knob to
input the number of the name, then push the
adjustable knob to complete the input. The program
saving is complete now.
Temp.
Speed
Timer
P1 5-2
Prog.
Prog. shows P1, 5-2，means the program and step
Set
Actual
30.5
1500
07:00
number. Refer to the figure, there are 5 steps totally,
now it's the second step.
5.3.4 Load Program
In the power on state, long push the prog.
button , enters the load program mode. Rotate the
adjustable knob to show the saved program, from
P1 to the last, at most 9 programs. Switch to the
program you want, and short push the prog.
Button to check the program in detail. Then
push the adjustable knob to start the program.
5.3.5 Single function running
If Temp. is set to ---.-, then it means working
without temperature control function. If Timer is set
to 00:00, it means work continuous. If speed is set
to -----, it means work without mixing function.