Aluratek CINECAM ADVC01F Manual de inicio rápido - Página 2

Navegue en línea o descargue pdf Manual de inicio rápido para Videocámara Aluratek CINECAM ADVC01F. Aluratek CINECAM ADVC01F 2 páginas. Aluratek dv camcorder

Imprimir página

Operating Instructions

STEP 1. Installing the Battery:

1. Open the battery door.

2. Insert (2) AA alkaline batteries into the camera.

3. Power on / off by holding

for 3 seconds.

STEP 2. Inserting a Memory Card (not included)

ADVC01F has a very small amount (16MB) of built-in memory. It is highly recom-

mended to increase the memory capacity with a SD or SDHC memory card (not

included). Follow the instructions below to insert the optional SD / SDHC memory

card into the camera.

1. Turn off the camera.

2. Insert the SD card into the camera.

Note: There is only one correct direction to insert the SD memory card into the slot. Do not force the

card into the slot, or else it may damage both the camera and the SD memory card.

Note: Most memory cards come pre formatted. If your memory card is not formatted, please follow

these simple procedures.

Specifications

Sensor

5.0 Mega pixel CMOS sensor

Image

VGA (640x480) / QVGA (320x240)

resolution

12.0 Mega pixels: (3920x2940) (Hardware Interpolation)

8.0 Mega pixels: (3264x2448) (Hardware Interpolation)

5.0 Mega pixels: (2560x1920)

3.1 Mega pixels: (2048x1536)

1.3 Mega pixels: (1280x960)

VGA: (640x480)

Lens

F/2.8 f=8.5mm

Focus range

0.5m. ~ Infinity

Macro mode

11cm – 18cm

Digital zoom

LCD display

2.0" real color LTPS TFT

White balance

Auto /Sunny / Cloudy / Fluorescent / Tungsten

Built-in memory

16 MB Flash memory

External memory card

SD card supports up to 8GB

File format

Picture: JPEG, Video: AVI,

PC interface / TV-out

USB 1.1 / NTSC, PAL

Power source

2xAA alkaline batteries.

(rechargeable batteries not recommended)

Troubleshooting

Problem

Cause

Can not power on the unit

Low battery power. Battery placed at wrong

polarities.

Photos can not be saved when

The memory card hasn't been formatted

taking pictures.

correctly or memory is full.

Can not find removable disk after

connecting the camera to the

Connection failure.

computer.

Photos are blurry

1. ADVC01F is not held steadily

2. ADVC01F lens is dirty.

3. ADVC01F is set to the wrong focus mode.

If you need further assistance, please contact the Aluratek support department for troubleshooting prior to returning this device.

E-mail: [email protected]

Local (Irvine, CA): 949-419-6504

Web: www.aluratek.com/support

Toll free: 1-866-580-1978

Formatting the Memory or SD Card:

Warning: Formatting will erase everything on the card

1. Press and hold Mode button to enter setting menu;

2. Select Setup mode by navigation keys and press REC to confirm;

3. Select Format by navigation keys and press REC to confirm;

4. Press REC to format the card or memory.

Setting the Resolution:

ADVC01F can be set to different resolutions.

1. Press and hold Mode button to enter setting menu;

2. Select Resolution by navigation keys and press REC to confirm;

3. Different resolutions will be displayed. Select the desired resolution by

navigation keys and press REC to confirm the selection.

Connect to TV

Yellow

Red

White

For standard

Audio

definition TV

Solution

Replace or install the battery correctly.

If the memory is full, use a different memory card. Format the memory card if it was

not formatted.

Warning: Format will erase everything on the card.

Make sure all cable connections are secured and restart the computer if necessary.

1. Hold ADVC01F steadily until it beeps when taking video photo.

2. Clean the lens with soft dry cloth.

3. Set the macro/normal mode according to the distances of subject.

STEP 3. Taking Video or Photographs:

1. Power on ADVC01F.

2. Press Mode to set ADVC01F to photo mode (

3. Depending on the distance to the object being photographed, use Macro switch

to adjust the distance. Select the flower symbol (

graph (11cm –18cm). To take video or photograph of surroundings or people

(0.5m - infinity), set the Macro switch to Normal mode (

4. Use the LCD screen to aim the object you wish to take video or photograph.

5. Press REC button.

Caution: 1) Taking picture for fast-moving object is not recommended.

2) Image may be distorted when taking picture in a moving vehicle.

Zoom IN and OUT:

ADVC01F has 8X zoom.

Zoom in or out by pressing the ▲or ▼ button, a number will appear on the display.

8.0x is the maximum zoom.

Connect to Computer

Software Installation:

1. Insert CD to your computer.

2. Select "Install MediaImpression"

3. Follow the onscreen instruction to install the

software.

Connect to computer:

1. Power on ADVC01F

2. Slide the USB switch to open the USB connector

3. Connect ADVC01F to the USB port on your

computer

4. ADVC01F will appear on your computer as a

"Removable Drive" in "My Computer"

5. You can manage your pictures/videos using the

MediaImpression software or click on the

"Removable Drive" directly.

Radio and TV Interference Statement

WARNING!!! This equipment has been tested and found to comply with the limits of a

Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by whatever measures may be

required to correct the interference.

STEP 4. Playback Photographs / Videos Clips :

Photographs Playback :

) or video mode (

1. Press Mode button to enter Playback mode, use

desired video clip or photo.

) to take a close up phot

2. Press ▲ or ▼ to zoom in or out the image.

Video Clips Playback:

1. When video clips are displayed, press REC to play, and press again to pause;

2. Press

keys for fast forward or backward;

3. Press Mode to exit.

STEP 5. Delete Photographs and Video Clips:

1. Press MODE to select Playback mode.

2. Press and hold MODE button to enter Delete mode.

3. Select single or all then press REC to confirm.

Note: you can also press Delete button to delete photograph or video clips in playback mode.

How to upload to Youtube from MediaImpression:

1. Select the video that you like to upload

3. Complete your YouTube

2. Click on the YouTube icon in menu bar

account information

4. Fill in the video info and click "Upload"

Warranty

Aluratek warrants this product against defect in material or workmanship for 1 Year

from the date of purchase.

This warranty becomes invalid if the factory-supplied serial number or "warranty void"

sticker has been removed or altered on the product.

This warranty does not cover:

A) Cosmetic damage or damage due to acts of God

B) Accident, misuse, abuse, negligence or modification of any part of the product.

C) Damage due to improper operation or maintenance, connection to improper equipment,

or attempted repair by anyone other than Aluratek.

D) Products sold AS IS or WITH FAULTS.

IN NO EVENT SHALL ALURATEK'S LIABILITY EXCEED THE PRICE PAID FOR THE

PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES RESULTING FROM THE USE OF THE PRODUCT, IT'S ACCOMPANYING

SOFTWARE, OR IT'S DOCUMENTATION.

Aluratek makes no warranty or representation, expressed, implied, or statutory, with

respect to it's products, contents or use of this documentation and all accompanying

software, and specifically disclaims it's quality, performance, merchantability, or fitness for

any particular purpose. Aluratek reserves the right to revise or update it's product, software

or documentation without obligation to notify any individual or entity.

keys to select the