ARTRAY ARTCAM-407UV-WOM-OP-CM Manual de instrucciones - Página 19
Navegue en línea o descargue pdf Manual de instrucciones para Cámaras térmicas ARTRAY ARTCAM-407UV-WOM-OP-CM. ARTRAY ARTCAM-407UV-WOM-OP-CM 19 páginas. Usb2.0 ultraviolet ccd camera 1.5 m pixels
También para ARTRAY ARTCAM-407UV-WOM-OP-CM: Manual de instrucciones (18 páginas)
Imprimir página
11. System Requirements
11-1 Recommended System Requirements
●Host Controller
This camera is applicable to USB 2.0.
●CPU
The driver of this camera is applicable to computer architecture "x86" or "amd64".
The specification of CPU effects directly the imaging process speed, therefore it is highly recommended to
utilize a high-end CPU if possible.
●Memory
In the viewer software, there is a data buffer which can store 4 to 8 frames.
Therefore, it is necessary to keep spare space at least for 8 frames in the memory.
(For example, when using 1.3MP color camera, 1280 x 1024 x 3 x 8 [byte] = 30[MB] is necessary.)
It is highly recommended to keep enough memory space especially when using high resolution camera.
●OS
This camera is applicable only to the architecture of Windows NT (32bit/64bit).
Standard functions are confirmed with OS after Windows.
In addition, it is recommended to use Windows 10.
Caution
■Please refer the restrictions below when you use ARTCAM series.
(1) Recommended System Requirements
If the system specifications do not meet the requirements recommended above, it may be difficult to run at the
maximum frame rate.
(2) Connection of Multiple USB Devices
When connecting multiple USB devices to one USB host controller, some USB device may fail to function stably
depending on the specifications of the host controller.
(Problem of power supply, data transfer bandwidth, etc.)
To avoid power supply problem, it is recommended to use powered USB hub.
(3) USB2.0 Cable Extension
We cannot guarantee the functionality of the USB2.0 camera if the user adopts USB2.0 extension cables or repeaters
which are not confirmed by us. With the extension cables or repeaters, the bandwidth of transfer may differ, and thus
caused malfunctions such as a low frame rate or recognition failure on the camera.
What may cause the problem is that the regulation of the power lines becomes not enough, and so causes impudence
mismatch on data signals.
*For the recommended extension cable, please contact our sales department.
(TEL: +81-3389-5488)
ARTRAY CO., LTD.
1-17-5 Kouenjikita, Suginami-ku, Tokyo 166-0002 Japan
Tel：+81-3-3389-5488
Email：[email protected]
- 19 -
Obtained ISO 9001: 2015 2018/9/17
Fax：+81-3-3389-5486
URL：www.artray. us