ALUZ A1-ZIBI-STN-RGBW Manual de instrucciones de instalación - Página 3
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Equipos de iluminación ALUZ A1-ZIBI-STN-RGBW. ALUZ A1-ZIBI-STN-RGBW 12 páginas. Surface standard rgbw
Imprimir páginaDMX WIRING DIAGRAM (Dry or Wet Location)
1170 N Red Gum St, Anaheim, CA 92806
aluz.lighting
© ALUZ All Rights Reserved. ALUZ reserves the right to make changes or withdraw specifi cations without prior notice.
A1 Series | Surface
ZIBI Standard RGBW
(A1-ZIBI-STN-RGBW)
DMX+ (White)
DMX- (Blue)
DMX
Signal
DMX Shield (Sleeve)
Ground (Green / Yellow)
Neutral (Blue)
Hot (Brown)
Primary Voltage
120-277V AC
866.ALUZ.LTG | 714.535.7900
NOTES
• Default DMX address per RGBW luminaire.
DMX Address 001 = Red
DMX Address 002 = Green
DMX Address 003 = Blue
DMX Address 004 = White
• Consult third party DMX commissioner to modify at time of installation.
• Connection from DMX controller to luminaire must be made using a proper daisy
chain connection per DMX-512 / RDM standards.
• Do not make DMX wiring connections in parallel.
• When connecting DMX Shield to a DMX controller terminal, ensure that it is not
connected to or touching earth ground, chassis ground, and/or DC power (-) return.
Page 3 of 12
DMX Wiring Diagram
Installation Instructions
4 / 29 / 2022 / Rev 2