3M 9085 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Proyector 3M 9085. 3M 9085 7 páginas. 9000 series overhead projector

Imprimir página

Lamp Replacement

ENX -- 82V, 360W

9050, 9060, 9070,

9080, 9100

FXL -- 82V, 410W

9075, 9085, 9200

1. Turn projector off and unplug the power cord.

2. Lift up top cover.

Lamp Changer/Indicator

1. The 9080, 9085, 9100, 9200 and 9550 have a

lamp changer feature.

Note

9080/9085 only: To access the Lamp

Changer Control, raise the Top Cover.

2. To activate the second lamp, rotate the lamp

changer knob (1).

3. The 9550 has an indicator that lights up red (2).

This visual reminder alerts the operator that one

or both of the lamps are burned out or missing.

3M 9000 Series Operator's Guide

FNT -- 24V, 275W

EVD -- 36V, 400W

9550 only

Lamp and adjacent metal parts are hot. Allow lamp

to cool before replacing.

3. Remove and discard the old lamp. See

Illustration (A).

4. Install new lamp.

5. Push fully and squarely into socket. See

Illustration (B).

ENX

FXL

6. Close the top cover.

High/Low Lamp Switch -- 9070,

9075, 9085, 9100, 9200, 9550

Note

Two lamps are provided with the 9200 and

9550.

1. The High-Low lamp switch (3) * is located on

the top front control panel.

2. High is recommended for LCD projection panels.

Low is recommended for normal use.

Note

Operating the OHP in the Low lamp setting

will extend lamp life.

Note

Opening the lamp changer will deactivate the

lamp (Lamp Interlock Switch (4)).

* On some models the switch is located inside the

top cover.

ENX

FXL

Page 3