1-CUBE OXI Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Instrumentos de medida 1-CUBE OXI. 1-CUBE OXI 11 páginas. Oxygen measuring device

Pic. 4 Connector input for connection of the charging adapter and the measured data

transfer into PC

6.2 O

MEASURED VALUES TRANSFER FROM THE MEMORY INTO PC (ONLY

OXI COMFORT TYPE)

Possibility of data transfer through comunnicating cable into PC. Before the first data transfer from the device into

PC, install program SerialWatcher from our supplied CD.

1) Connect the shut-off device OXI comfort with the help of cable FTDI USB-RS485-WE-1800-BT (supplied

with the device OXI comfort) with USB port of your PC.

2) Run the program SerialWatcher in your PC and set the corresponding COM port (f.e..COM 5), speed of transfer

9600 and Display ASCII.

3) Press the key ON to switch on the device OXI comfort . The text „1-CUBE" with the program version appears on

the display for a moment. Then the following text appears: „memory"

4) Press the key plus (+).There is text „memory" on the first line and the measured O

from the oldest to the newest ones on the second line.

At the same time these values are displayed in SerialWatcher program Windows in column one by one from the

oldest value to the newest ones. These values can be saved as file txt under any chosen name.

Notice. The measured values are displayed in ppb in SerialWatcher program.

6.3 Calibration

The device is calibrated at 2 points (0ppb and air). Calibration is run from PC with program Hamilton Device

Manager 1.0.0.. The program can be uploaded for free at www.hamiltoncompany.com. It is necessary to have

connector USB-RS485 ModBus Converter.

User's Guide - Movie Links:

http://www.youtube.com/watch?v=1tLYJnsVIDw

http://youtu.be/I6Vy4xH4ZDQ

„view"

values appear one by one