3M Digital Projector X64 Manual de seguridad del producto - Página 10
Navegue en línea o descargue pdf Manual de seguridad del producto para Proyector 3M Digital Projector X64. 3M Digital Projector X64 15 páginas. Technical
También para 3M Digital Projector X64: Especificaciones (2 páginas), Configuración rápida (1 páginas), Manual del usuario (16 páginas), Folleto y especificaciones (2 páginas)
Imprimir página
Lamp Operation:
The following symptoms may indicate a lamp in need of replacement:
• LAMP indicator lights up red.
•
To reduce the risk associated with environmental contamination due to
mercury in the projection lamp:
-
Dispose of lamp cartridge in accordance with applicable federal, state and local regulations.
-
The lamp in this product contains mercury. Dispose of projection lamp in a manner
that is consistent with your local hazardous waste regulations for mercury.
-
For recycling and disposal information, contact your respective governmental
agencies.
In U.S., contact 1-800-328-1371 (3M US) or the Electronic Industries Alliance at
www.lamprecycle.org
In Canada, contact 1-800-364-3577 (3M Canada)
Display Lamp Operation Hours
To determine the lamp operation hours, follow these steps:
1. While the projector is running, press the MENU button on the remote control.
Choose the "OPTION" using the
Choose the "LAMP TIME" using the
2. The operating time of the lamp will be displayed.
The lamp time is the time counted after the last resetting.
Please reset the lamp time only when you have replaced the lamp, for a suitable
indication about the lamp.
Reset Lamp Hours
(1) Press the MENU button to display a menu. Only when the EASY MENU has appeared,
please perform the next step (2).
appear.
time.
10
Lamp
WARNING
button, and press the
Note
3M™ Multimedia Projector X64 Product Safety Guide
button or the ENTER button.
button.
© 3M 2007