BluCube CXC?800?3 Manual del usuario y manual de instalación - Página 7

Navegue en línea o descargue pdf Manual del usuario y manual de instalación para Altavoces BluCube CXC?800?3. BluCube CXC?800?3 11 páginas. Circular, flush-mount, in-wall/in-ceiling loudspeakers
También para BluCube CXC?800?3: Manual del usuario y manual de instalación (13 páginas)

Imprimir página

Wood stud/joist

Cutout for speaker in plasterboard

When installing in an existing

construction, take care not to cut

through any existing wiring or

plumbing.

Installing your loudspeakers during a new

construction/renovation

If you are installing your flush-mount BluCube loudspeakers during a

renovation or new construction, you will probably have the benefit of

exposed joists, ceilings and stud walls. This makes the running of the

speaker cables very much more straightforward.

The mounting surfaces used should be at least 10mm thick to ensure safety

and speaker stability.

Your BluCube loudspeakers come with pre-construction brackets. These

can be optionally used to assist with installation. They can be nailed or

stapled between the joists or studs in the planned speaker position with the

flange of the speaker cutout facing out.

As the plasterboard is fitted you will find it easier to accurately cut out the

necessary hole for your BluCube loudspeaker reducing installation time and

debris when the speakers are being fitted.

Installing your loudspeakers in an existing

construction

If you are installing your flush-mount BluCube loudspeakers after a

renovation or new construction has been completed, installation may be a

little more challenging as you may have to fish cables to minimise any

disruption to the decor of your home.

Note: Wirelessly Controlled amplifiers. The use of wireless amplifiers (such as

those found in the Sonos

flush-mount speakers in homes where construction is already completed. For

instance, if you are wishing to install your BluCube loudspeakers in upstairs

rooms, consider whether the attic space is a suitable location for your amplifier.

This would greatly reduce the cable runs required and almost certainly avoid

redecoration needs. Alternatively, consider whether the cables may be run

across the attic and down into an adjacent room.

If you wish to install your BluCube loudspeakers in downstairs rooms, identify

their desired positioning and consider what room is above this location. For

instance, maybe it is a bedroom and maybe it is possible to lift the carpet and

floorboards to access the void and hence to enable the cable runs to the

speakers below. It may then be possible to locate the amplifier conveniently in

the room above

The benefit of using wireless technology in this context is the ability to locate the

amplifiers in locations that will minimise the need for disruption to and

redecoration of the wall or ceiling surfaces. For more information visit:

www.blucubespeakers.co.uk/sonos.

www.blucubespeakers.co.uk

Music System) will greatly assist the installation of