DNF Controls 2MCE-24P Manuales de usuario - Página 5

Navegue en línea o descargue pdf Manuales de usuario para Controlador DNF Controls 2MCE-24P. DNF Controls 2MCE-24P 19 páginas. Two machine, cuts only editor with 24p editing capability

Imprimir página

INSTALLATION

ST300-S/SM, VTR/DDR CONTROLLER

SELECT RECORDER

Press [SHIFT] + [VTR1], [SHIFT] + [VTR2], [SHIFT] + [VTR3], or [SHIFT] +

[VTR4] to select the RECORDER. The VTR's LED will flash.

SELECT PLAYER

Press [VTR1], [VTR2], [VTR3] or [VTR4] to select the PLAYER. The VTR's LED

will turn on.

NOTE: Selecting a PLAYER VTR will automatically put the RECORDER VTR into

EE mode. The selected PLAYER VTR indicator will turn on and remains on when the

RECORDER is selected.

REFERENCE VIDEO INPUT

Connect Black Video or the Tri-level Sync (for 24P editor) to the Reference Video BNC

on the rear of the 2MCE.

NOTE -

SET THE

2MCE-24P, Two Machine, Cuts Only Editor

Plug one end of a 9-conductor, RS422 serial cable into the 9-pin connector

(VTR1, VTR2, VTR3 or VTR4) on the rear of the ST300. Plug the other end of

the cable into the 9-pin remote connector on the Video Server.

Connect the +5, +12, -12 VDC POWER SUPPLY into the POWER connector

on the rear of the ST300. Plug the Power Supply into a wall outlet, 90 VAC to

240 VAC.

Check SETUP MENU prior to using the ST300 to confirm proper Record mode

and other User settable modes.

The ST300 will allow edits without sync.

VTR'S

COLOR FRAME

Set the color frame on the

Set the VTRs Capstan Lock. Set Capstan Lock on the Recorder to "2FD."

MODE

RECORD DECK

to: ON

PLAYBACK

to: OFF