DNF Controls 2MCE-24P Manuales de usuario - Página 9

Navegue en línea o descargue pdf Manuales de usuario para Controlador DNF Controls 2MCE-24P. DNF Controls 2MCE-24P 19 páginas. Two machine, cuts only editor with 24p editing capability

Imprimir página
e.
PERFORM AN
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
NOTE: Prior to performing an Edit, the time type of the IN and OUT are checked. If
9
2MCE-24P, Two Machine, Cuts Only Editor
EDIT
Select the PLAYER
VTR.
Set the IN point by manually entering a time using the numeric
OR
By pressing
[IN]
and marking the current tape time.
Set OPTIONAL OUT point using the same procedure as
OR
Set the OPTIONAL OUT point by pressing
The display will show the current PLAYER duration.
Manually enter the desired duration using the numeric keypad.
Press
[OUT]
to save the entered
OR
Press
[ESC]
to exit without saving the
Select the
RECORDER.
Set the IN point by manually entering a time using the numeric keyboard.
OR
By pressing [IN] and marking the current tape time.
Press [PREVIEW] to preview the edit.
Press
[REC]
to perform the edit.
The RECORDER and PLAYER will preroll, then synchronize.
At the IN point, the RECORDER will go into record.
At the OUT time, the RECORDER will terminate record.
During the edit, in INSERT mode, press the Softkeys to punch desired channels
into and out of record.
Press
[STOP]
at anytime to abort the edit.
OR
For OPEN-ENDED edits, press
Upon successfully completing the edit,
The RECORDER IN Point will be set to the record out time.
The PLAYER IN Point will be set to the PLAYER out time.
The RECORDER and PLAYER will cue to their respective
they are not both Tape Time or Time Code, an Error message is displayed and
the Edit is aborted.
IN.
[SHIFT]
+ [OUT].
duration.
entered
duration.
[OUT]
to terminate the edit.
keyboard.
IN
times and park.