DNF Controls SW32PS-RCP Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Control Panel DNF Controls SW32PS-RCP. DNF Controls SW32PS-RCP 17 páginas. Rs422 port switcher remote control panel

Imprimir página

Getting Started . . .

2. DESCRIPTION

The control panel consists of the ST100 controller hardware and the special

software that allows controlling the SW32PS for the following functionality:

Make route, view routes, gang outputs to input, disconnect route, disconnect

gang, save preset, restore preset.

Easy to read LCD Display has 2 lines by 20 characters.

Shows source (From) and destination (To) routing and gang information.

6-function keypad provides:

From

View

Take

Gang

Preset

Ideal for: Television Stations, Video Productions, Cable TV, Video Post

Production, Duplication Houses

NOTE: Words enclosed in brackets, such as [TAKE] indicate buttons on the

SW32PS-RCP. Buttons shown with a "+" between them, for example

[SHIFT] + [TAKE], indicate two keys pressed simultaneously.

3. INSTALLATION

Plug one end of a 9-pin cable into the connector labeled "VTR" on the

back of the controller. Plug the other end into one of the connectors

on the port expander. Plug the port expander into the connector

labeled "RS422" on the back of the SW32PS port switcher.

Dip Switches Configuration for SW32PS-RCP.

Every SW32PS-RCP has to have a unique ID from 1 to 10. The ID

should match the External Device number set in the SW32PS.

For example, if you use only one SW32PS-RCP with the SW32PS, the

External Device should be set to 1 and the ID of the RCP should be 01.

(The ID can be seen on the second line of the display during the power

up of the RCP.)

If you use two SW32PS-RCPs with the SW32PS, the External Device

should be set to 2 and the ID of the RCPs should be 01 and 02. (The

IDs can be seen on the second line of the display during the power up

of the RCP.)

SW32PS-RCP Port Switcher Controller

(Select Source)

(Select Device)

(View active router)

(Enable the selected route)

(User control of multiple destinations)

(Select Preset)

Page