Blue Clean AR240S Manual de instrucciones - Página 14
Navegue en línea o descargue pdf Manual de instrucciones para Lavadora a presión Blue Clean AR240S. Blue Clean AR240S 20 páginas.
Imprimir página
•
Unwind the power cord completely and plug the GFCI into a grounded 120 volt outlet. Press the
'reset' button on the GFCI box (Fig. 21). The indicator window should show a red color. This must
be done each time the unit is plugged in.
•
Release the safety lock button on the spray gun by pressing the safety lock button from right to
left (Fig. 22). While pointing the spray gun in a safe direction, squeeze the trigger on the spray
gun until there is a steady stream of water, letting the water and air out of the hose.
•
Turn the power switch to the 'ON' (|) position. The unit will turn on for 1 - 2 seconds and shut off,
this is a normal function of the (TSS) auto start feature. Squeeze the spray gun trigger to begin
pressure washing.
•
Squeezing rapidly will cause the (TSS) feature to miss an on/off cycle that may prevent from
turning on while squeezing trigger after rapid squeezing. Use slow deliberate trigger pulls to
avoid such symptoms.
H
t
c
oW
o
Lean
Cleaning nozzles
•
A clogged or partially clogged nozzle can cause significant reduction of water pressure coming out
of the nozzle and/or cause the unit to pulsate while spraying.
•
Turn off the unit
•
Turn off the water supply to the unit
•
Relieve any pressure trapped in the hose by squeezing the trigger 2-3 times, and then lock the
spray gun by pushing the lock button from left to right.
14
Press to
Lock
1
Fig.21
2
2
Trigger
Trigger
Press to
Unlock
1
Fig. 22