Blue Clean AR383L Manual de instrucciones - Página 14

Navegue en línea o descargue pdf Manual de instrucciones para Lavadora a presión Blue Clean AR383L. Blue Clean AR383L 20 páginas.

•

Unwind the power cord completely and plug the GFCI into a grounded 120 volt outlet. Press the

'reset' button on the GFCI box (Fig. 20). The indicator window should show a red color. This must

be done each time the unit is plugged in.

•

Release the safety lock button on the spray gun by pressing the safety lock button from right to

left (Fig. 21). While pointing the spray gun in a safe direction, squeeze the trigger on the spray

gun until there is a steady stream of water, letting the water and air out of the hose.

•

Turn the power switch to the 'ON' (|) position. The unit will turn on for 1 - 2 seconds and shut off,

this is a normal function of the (TSS) auto start feature. Squeeze the spray gun trigger to begin

pressure washing.

•

Squeezing rapidly will cause the (TSS) feature to miss an on/off cycle that may prevent from

turning on while squeezing trigger after rapid squeezing. Use slow deliberate trigger pulls to

avoid such symptoms.

Lean

Cleaning nozzles

•

A clogged or partially clogged nozzle can cause significant reduction of water pressure coming out

of the nozzle and/or cause the unit to pulsate while spraying.

•

Turn off the unit

•

Turn off the water supply to the unit

•

Relieve any pressure trapped in the hose by squeezing the trigger 2-3 times, and then lock the

spray gun by pushing the lock button from left to right.

•

The screen inside the clear adapter should be cleaned periodically. Insert a pen or pencil in small

hole at the end of the adapter. The screen filter will slide out (Fig. 22). Rinse it with clean water,

and then place it back in the adapter..

•

Using the nozzle tip cleaner provided (or an unfolded paper clip), insert the wire into the nozzle

hole and move back and forth until debris is dislodged (Fig. 23). Back flush water through the

nozzles using garden hose and highest pressure available (either standard water nozzle or use

your thumb over the nozzle to create water pressure for back flush).

Press to

Lock

Fig.20

Fig. 22

Trigger

Press to

Unlock

Fig. 21

Fig. 23