DO HEATING Rebo Instrucciones de fijación - Página 2

Navegue en línea o descargue pdf Instrucciones de fijación para Sanitarios DO HEATING Rebo. DO HEATING Rebo 8 páginas. Towel rail

Specifications

PLEASE NOTE: That in accordance with Part L1 2006 of the Building Regulations and BS7593:1992

code of practice for the treatment of hot water and central heating systems, we recommend

flushing the heating system before installation of new radiators and then adding the correct

quantity and type of inhibitor for use with the radiator and system to prevent corrosion. Damage

caused to systems not protected by a suitable inhibitor will not be covered by the manufacturer

warranty. It is the responsibility of the installer to ensure the correct use and suitability of the

fixings provided. No liability for costs or damages arising from failure to do so can be accepted.

Vent on back

F/R

H80 – 5 tubes

H120 – 7 tubes

Technical Information

Standard connections: ½"

F = Flow

R = Return

Wall to front face = 90-125mm

Wall to pipe centre = 65-100mm

Materials: Stainless Steel

Connections: ½" Flow and Return

Test pressure: 7 Bar

Testing authority: EN442

Max operation pressure: 4 Bar

Max working temperature: 95c

These can be cleaned using a soft

damp cloth with a non-abrasive

cleaning product.