FLATLIFT EXTRA FLAT Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Soporte para TV FLATLIFT EXTRA FLAT. FLATLIFT EXTRA FLAT 16 páginas. 43" / 50"

O u t p e r f o r m . O u t l a s t .

Resetting the receiver:

It may sometimes occur that the transmitting codes stored in the receiver are lost.

In this case, the receiver must be cleared and re-programmed.

1) To access the programming key, remove the cover (image 1, no. 1) on the receiver.

2) Press down both of the programming keys (image 3, no. 2 + 4) until the LED (image 3, no. 3) rapidly

flashes. This is the signal that the memory has been successfully cleared.

3) Now re-enter your remote control (refer to P.08).

Connection to a room control system:

You can connect your Flatlift to a room contro

l system (image 5) if this system has 2 relay outputs

with potential free contacts. These relays must be

actuated for a programmable time period.

1) Remove the receiver from the power supply

2) Remove the cables (contacts 2-4) from the receiver

(image 4).

3) Now connect the blue and red cable to one of the

relay outputs (control command: lower Flatlift).

4) Bridge the blue cable onto the second relay

output and also attach the green cable to this

relay output (lift Flatlift).

C.05:

P.09

Image 3

Operating Manual

PRODUCT CONTROL

Image 4

Image 5