Dobinsons BU63-3675 Manual de instalación - Página 5
Navegue en línea o descargue pdf Manual de instalación para Accesorios para automóviles Dobinsons BU63-3675. Dobinsons BU63-3675 13 páginas. Bullbar for vw amarok
Imprimir página
10. Remove the lower section of the bumper.
11. Remove the foam bumper bar re-
enforcement section, and the plastic centre
cover plate.
12. Loosely fit the "L" shaped brackets (item no.3)
to the left and right side chassis brackets
(item no. 1) using the bolts, nuts and washer
supplied, as per page 3.
Dobinsons Springs and Suspension
13. Loosely Install both chassis & "L" shaped
brackets to the chassis fitting the nuts and
bolts to the front side of the brackets – you
will see that there are 2 holes that need to be
drilled through the chassis.
14. Install the U-bolts from the inside of the
chassis rails through the "L" shaped brackets
as per page 2 and install nuts and washers.
15. Tighten the 2 front bolts on each chassis
bracket.
16. Drill the remaining 2 bolts holes on the front
of each side mounting bracket to 13mm, paint
bare metal and install bolts, nuts and washers.
www.dobinsonsprings.com