ET Solar ET SOLAR Series Manual de instalación - Página 5

Navegue en línea o descargue pdf Manual de instalación para Panel solar ET Solar ET SOLAR Series. ET Solar ET SOLAR Series 9 páginas. Photovoltaic modules

Imprimir página

Clamping installation

Use four clamps on short frame

Permissble position of clamps

snow load 5400Pa/wind load 2400Pa

Use four clamps on long frame

1/4 of module lenth

Permissble position of clamps

snow load 5400Pa/wind load 2400Pa

4.3 Anti-salt module mounting procedure

For photovoltaic systems to be installed near the coastline, we recommend using ET

SOLAR Anti-salt modules with the following installation action items.

www.etsolar.com

Subject to technical modifications without notice. 2016 © ET Solar Group

Use four clamps on long frame

1/4 L ±50mm

Permissble position of clamps

snow load 2400Pa/wind load 2400Pa

1/4 of module lenth

Mainstream Grounding Methods:

Grounding bolt

Fluorocarbon paint

Grounding wire

Grounding System Installation Steps:

Before the installation of each module, clean the frame installation area (35mm by

100mm surrounding the grounding hole) and keep it dry.

Choose either one of the two options described in the diagrams above to properly

ground the module.

Spray varnish on the yellow portion of the diagram covering the entire grounding

area. We recommend fluorocarbon varnish.

Recommended mounting methods

For mounting system with bolts, refer to picture 1 and 2.

Hexagonal screw

Plain washer

Elastic washer

Insulation gasket

Picture1

www.etsolar.com

Fluorocarbon paint

Grounding wire ring

Grounding wire

Option 2

Picture 2