Flavor Burst CC8 Manual de consulta rápida - Página 6
Navegue en línea o descargue pdf Manual de consulta rápida para Equipamiento alimentario comercial Flavor Burst CC8. Flavor Burst CC8 15 páginas.
Imprimir páginaCW 194 KEYPAD OVERLAY - AUTO- continued
B
A ADJUSTING ALTERNATING INGREDIENT TIMING
1
Press and hold the #1 and #2 keys simultaneously until
the keypad lights flash.
3
To increase the timing (for wider layers), press the
LARGE CUP (+) key until the correct number of bar
graph lights are lit.
WIDER LAYERS
5
Press the Cancel Entry key to set the adjustment and
exit the mode.
REV031008
2
The number of lighted bars in the graph represent the
length of time each layer is dispensed.
following chart to determine the bar graph setting
needed for the desired dispense time for each
ingredient layer.
4
To decrease the timing (for more narrow layers), press
the SMALL CUP (-) key until the correct number of bar
graph lights are lit.
NOTE:
IF
ALTERNATING INGREDIENT TIMING HAS BEEN
SET, SET THE TIMING TO ONE LIGHT (.5 SECONDS),
DRAW A SERVING, AND THEN ADJUST THE TIMING FOR
WIDER LAYERS IF NEEDED.
6
Draw a serving to determine if the adjustment is
satisfactory. Repeat this process until the correct
ingredient concentration is achieved.
6
ALT. INGREDIENT TIMING
1 Light
=
.5 seconds
2 Lights
=
.6 seconds
3 Lights
=
.7 seconds
4 Lights
=
.8 seconds
5 Lights
=
1.0 seconds
6 Lights
=
1.2 seconds
7 Lights
=
1.4 seconds
8 Lights
=
1.6 seconds
9 Lights
=
1.8 seconds
10 Lights =
2.0 seconds
NARROWER
LAYERS
THIS
IS
THE
FIRST
Use the
TIME
pg. 2 of 3