Aiper Seagull 1000 Manual del usuario - Página 10
Navegue en línea o descargue pdf Manual del usuario para Aspirador de piscinas Aiper Seagull 1000. Aiper Seagull 1000 20 páginas. Robotic pool cleaner
Imprimir página
d. Turn the switch knob to ON after putting it into water. Now the cleaner
is power-on and the indicator light is steady blue. The cleaner begins to
work about 15 seconds later while the blue light flashes.
e. The blue light flashes three times after completing the working cycle and then
the cleaner stops to run about 2 minutes later while the indicator light is steady blue.
Working
Low battery
f. Power-off operation: turn the switch knob to OFF and the blue light turns off,
then the cleaner is power-off. Please timely clean the filter tray after use.
4.3 Functions & Adjustments of Nozzles
There are two nozzles on the cleaner, one of them opens when the other closes.
Water flows out through the open nozzle to thrust the cleaner to move forward.
Adjust the nozzle by turning it to control the moving route.
a. Settings of nozzle angle and moving route
Sketch: the nozzles of the cleaner are marked with angles (0°-40°). The cleaner
moves in an approximately straight line when the nozzle angle is 0°. The cleaner
moves in a more curved line at a larger angle from 0°-40°.
b. Recommended three cycles and nozzle settings
ON
Status
Cleaner indicator
Blue indicator flashes slowly
Blue indicator flashes quickly
6
OFF