DockCraft 100 Series Manual - Página 13

Navegue en línea o descargue pdf Manual para Equipamiento náutico DockCraft 100 Series. DockCraft 100 Series 15 páginas.

Canoe Dock Rack

Bolt on Mount

- Bolts in 2 locations per Mount

- 2 Mounts per Dock Rack

Surface Mount (Bolt On) Mount Overview

Wood Dock with Decking on top of Side Board

Ideal for situations when the underside

of your Dock is not accessible

- Floating Docks -

Wood Decking overhanging Dock Sideboard

"The DockSider" Mounting Options

DockCraft Industries Bolt On Mount for "The DockSider"

Boat Docks come in many different configurations

Location #2 - 5 inches

Location #1 - 2 1/4 inches

Location #2 - 5 inches

Location #1 - 2 1/4 inches

- Canoe Dock Lift -

Decking

1 inch to 1 1/2 inch thick

Dock SideBoard

Typically 1 ½ inch wide

Standard Hardware – Included in Purchase

- 1/4 -20 x 2 ½ inch Stainless Steel cap screw, each location

- ¼ inch Stainless Steel washer, each location

- Stainless Steel Snap Toggler, each location

Standard Installation Requirements

•Drill ½ inch diameter holes in locations shown

•Insert Snap Togglers per directions from top of Dock

•Insert screws and washers then secure.

Hardware

- Standard Hardware

- 1/4 x 2 ½ inch Stainless Steel lag Screw – location #1, not included

- ¼ inch Stainless Steel washer, each location

Installation Requirements

•Standard Installation; except

•Location #1, Drill 1/8 or 3/16 inch pilot hole through decking and

into side board.

•Insert Lag Screw and washers to secure.

Page 13 of 15

Location #2 - 5 inches

Location #1 - 2 1/4 inches