DockCraft DS300 Instrucciones de montaje, instalación, configuración y funcionamiento - Página 12
Navegue en línea o descargue pdf Instrucciones de montaje, instalación, configuración y funcionamiento para Equipamiento náutico DockCraft DS300. DockCraft DS300 12 páginas.
Imprimir página6 - Float your kayak completely out of the rack and
then pull on the tether cord, to lift the cradle back
into the storage position.
7 - Rotate one of the Latch Plates back into its holding
position such that the cradle will not rotate back
into the water when released.
8 – Enter your Kayak ensuring you are clear of the rack,
Grab your paddle and start your voyage.
To Load and Store:
Dockside Operating Models
1 - Exit your kayak assuring you are clear of
kayak rack.
2 – Release the Latch Plates and lower the cradle.
3 – Secure tether strap to the Pivot Lateral such that your
float into your rack between the handle
and the lifting webbing.
4 - Float your kayak into the rack and position
5 - Grasp the tether strap and slowly lift / rotate your
and rack into its storage position.
6 - Grasp the handle of your rack, holding it in its
position.
7 - Rotate the Latch Plates into position such that your
kayak will not rotate back into the water.
8 - Release your hand from the cradle handle and
secure the tether cord to a pivot lateral or the
handle with a simple overhand knot.
9 - If you choose, store your paddle between the
webbing under the cam buckle.
"The DockSider"
For assistance, please call: 585 – 734 – 7374
Or send email to:
Operating Instructions - continued
WE SINCERLY HOPE YOU ENJOY THE CONVENIENCE OF
TM
6 - Rotate one of the Latch Plates back into
position such that the cradle will not
Rotate back toward the water.
7 - Enter your kayak ensuring you are clear of
the rack, grab your paddle and start your
Voyage
Waterside Operating Models
1 - Exit your kayak assuring you are clear of the
the kayak rack.
2 - Release the Latch Plates and lower the
cradle.
3 - Position the cradle such that your kayak kayak will
will float into your rack between the
handle and the lifting webbing
4 - Float your kayak into the rack and position
5 - Grasp the center of the handle and slowly kayak
lift / rotate your kayak into its storage
position.
6 - Rotate the Latch Plates into position such storage
that your kayak does not accidently
rotate back into the water.
7 - Store your paddle between
the webbing under the cam buckle.
You're DONE - just Load / Latch / and walk away!
DockCraft Industries LLC
3694 Nibawauka Beach
Canandaigua, New York 14424
www.DockCraft.com
Page 12 of 12