ETA Systems ETA-ECS3 Manual - Página 12
Navegue en línea o descargue pdf Manual para Equipos de grabación ETA Systems ETA-ECS3. ETA Systems ETA-ECS3 16 páginas. Power sequencer & conditioner
Imprimir páginaSPECIFICATIONS
Type
Sequencer Sections
Load Rating
Safety Listing
Front Panel
AC Outlets
Lights
Activation Switch
Circuit Breaker
AC Mains Voltmeter
Indicators
Rear Panel
AC Outlets
External Switch Activation Trigger
External Voltage Activation Trigger
DC Output
LED Light Socket
LED Light Switch
Grounding Terminal
AC Mains Power Cord
Technical Data
Current Rating
Power Consumption
Operating Voltage
High Voltage Surge Protection
Low Voltage Protection
Voltmeter Accuracy
Spike Protection Modes
Min. Spike Clamping Voltage
Max. Spike Clamping Voltage
Max. Spike Clamping Resp. Time
Spike Clamping Voltage @ 100A
Maximum Surge Current
Energy Rating @ 2ms
Noise Attenuation EMI/RFI Seq. Section 1 & 2
Temperature Range
Humidity Range
Mechanical
Chassis Finish
Mounting
Dimensions
Weight
ETA-ECS3
Power Sequencer & Conditioner
Power Sequencer, Power Conditioner & Suppressor
3, Fixed Time of 3 Seconds Between "On" Seq. 2 & 3, "Off" 2 & 1
15A Continuous
ETL (UL 60065 Standard)
2 Unswitched
1 Pull out LED with Dimmer Switch
Momentary
15A Resettable
Three Digits (Digital)
Sequencer Sections 1, 2 & 3, Abnormal Voltage, AC Fault, Breaker Open, Wiring Fault
7 Total, Sequence Section 1 (3 outlets), Sequence Section 2 (2 Outlets),
Sequence Section 3 (1 outlet), Unswitched (1 Outlet)
Momentary Contacts, 2 Position Euro/Phoenix 5.08mm Type Connector
5-24VDC Continuous, 10mA, 2 Position Euro/Phoenix 5.08mm Type Connector
12VDC 100mA Output Paralleled to Sequencer Section 3 Timing
XLR Socket to Provide 12VDC for Optional 16" Gooseneck Lamp, AP-GNL18
Two Position On/Off
Hand Screw Type Terminal to Chassis Ground
9' (3 Meters) 14-gauge
15 amps
12 watts
102 - 132VAC
Trigger at 133VAC, 1ms Typically
Trigger at 101VAC, 1ms Typically
±1.5VAC
DCS (Dual Clamping Suppression) Circuitry on Incoming AC Mains and Each
Sequential Section Output
460 VRMS @ 3,000A
6kV
1 nanosecond
1250Vp for 20μs
6,500A
2000 Joules
10dB @ 10 kHz, 40dB @ 100 kHz, 100dB @ 10 MHz
5º to 35º C
5% to 95% R.H.
B lack
Rack Mount, 19", 1 RU
Height 1.75" (44.45mm) x Width 19" (482.6mm) x Depth 8.5" (215.9mm)
7.6 lbs (3.45kg)
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800-321-6699 • Fax: 800-996-3821
– 12 –
Specifications are subject to change without notice.
ETAsys.com