Etabeta electronics NT Series Manual de instrucciones - Página 5

Navegue en línea o descargue pdf Manual de instrucciones para Mezclador de música Etabeta electronics NT Series. Etabeta electronics NT Series 18 páginas.

Imprimir página

Quick to use

1. When the mixer is turned off, select one MIC/ LINE input channel, plug in the microphone or CD

player and other external audio source to connect to the mixer, please make sure before connecting

Keep the access channel mute or push the physical push to the lowest position.

2. Access the L/R main output interface at the back of the mixer with the audio casson cable, and

connect the power amplifier at the other end to the speaker.

3. Switch on the power supply and turn on the mixer, wait for the mixer to completely start up, and

then turn on the power amplifier.

4. After starting the mixer, push the physical pusher inserted into the MIC/ LINE input channel to the

appropriate position.

5. Then also push the physical pushers of the main output to the appropriate position.

6. Adjust the input gain of the input channel to make the input signal achieve the appropriate dynamic.

7. If you are connected to a capacitive microphone or other device that requires power, turn on the

Phantom Power.

8. According to the demand of the signal source, the equalizer is used to enhance or weaken the

corresponding frequency band, and the compressor and threshold are used to control the dynamic

range.

9. Send input signals to each effector, output bus and main output.

10. Change the main push until the sound system produces the right amount of sound.