Etabeta electronics NT-16 Manual de instrucciones - Página 10

Navegue en línea o descargue pdf Manual de instrucciones para Mezclador de música Etabeta electronics NT-16. Etabeta electronics NT-16 18 páginas.

Imprimir página
Features - later version
6
1. Monitoring headphone jack/and monitoring knob
Insert the headset into this jack. It is recommended that the impedance of the headset be
greater than 150oHM.Monitoring level knob This knob is used to control the monitoring signal
level.
2. USB interface
1).USB2.0: Connect the computer software debugging and audio card audio input interface. 2).
U-Disk: U DISK interface, MP3 audio input and system upgrade interface.
3. Central Control
1). Central control RS232: external 232 central control device control connection.
2). Link: External router network cable connection control.
4. optical fiber signal input/input
1). In port is the fiber input
5. MIC/ LINE microphone input interface
All balanced input ports, 12 XLR socket, can be connected to XLR line can also use 1/4"
TRS line is connected to audio signal source.
6. Power input port and switch
110V-220V power interface.
7. Stereo input
Stereo line input interface.
8. Effect switch jack
This is the connection of the foot switch. If necessary, you can connect it here
9. Main output LR output interface
L/R outputs signals to power amplifiers or other amplifiers.
10. SUB1-2 marshals output
SUB1-2 marshals output signals to power amplifiers or other amplifiers.
11. AUX1-4 auxiliary output
AUX1-4 auxiliary output signals to power amplifiers or other amplifiers.
2
1
1
1
2
R T G
RS232
12
11
10
9
FOOTSW
MAIN OUTPUT
9
7 8
2). Out port is the optical signal output end.
3
4
2
2
1
LINK
IN-S/PDIF-OUT
8
7
6
5
4
SUB OUTPUT
2
1
4
10
9
5
3
2
1
AUX OUTPUT
3
2
1
11