Etac Molift Air Series Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Ayuda a la movilidad Etac Molift Air Series. Etac Molift Air Series 15 páginas.

Assembly and installation

The hoist is marked with Safe Working Load

(SWL), this should not exceed rail systems max

load capacity.

The rail system can only be

installed by certified personnel in

accordance with applicable installa-

tion instructions.

Do not start using hoist before

completing control according to

Mounting trolley in rail system

Remove End stop and insert Trolley into rail.

Mount end stop, and make sure it is securely

fastened

Make sure end stops are mounted

in all ends of the Rail system before

using the hoist!

Installation

Mounting of Lifter on trolley. No tools required.

The lifter has two connection points.

Connect one point first. Push button all the way

in, and place lifter in connection point on trolley.

Release button and make sure it is clearly show-

ing green before connecting the next point.

Make sure both connection point buttons

completely return and clearly show green after

installation.

Emergency lowering cord and tube can be

adjusted to the correct length (height) by cutting

tube and cord.

Checklist after installation

Use this checklist to verify that the hoist is

properly installed and can operate correctly an

d safely before use.

End stops on rail are installed after mounting

of trolley

Make sure that the hoist is properly fastened

to the rail and that the lift does not have any

loose parts.

Perform one lift with normal load (60-80 kg)

Make sure battery is fully charged.