Etac Molift Raiser Instrucciones de reacondicionamiento - Página 4
Navegue en línea o descargue pdf Instrucciones de reacondicionamiento para Ayuda a la movilidad Etac Molift Raiser. Etac Molift Raiser 5 páginas.
También para Etac Molift Raiser: Manual (20 páginas), Instrucciones de reacondicionamiento (3 páginas)
Imprimir página
Molift Raiser
Reconditioning instruction / Re-use
English
Up to serial number 16090201
Molift Raiser can be reconditioned.
This reconditioning instruction is meant for the technician in charge of the reconditioning.
-
Use a solvent-free detergent with a pH level between
5 and 9.
-
Can be washed at 70° C for 10 minutes. (not with leg
support).
-
Use a wet wipe for the leg support.
1
Check brake functionality
-
Parking brake
-
The wheels must lock in brake position.
-
The parking brake must stay in locked position.
-
Lubricate the brake mechanism.
2
-
Check the height controls and that the snap function
can lock in all positions
-
Check that the pad does not have any damage.
3
-
Check that the base plate is secured and that it does
not have any damage.
2
3
5
Leg Support
Base plate
4
1
Washing
-
Do not rinse directly on bearings and leg support with
a pressure washer.
-
Lay the Raiser on the floor in an angeled position
after washing, so the water runs out.
-
You may also use copressed air to blow dry.
4
-
Ensure that all ten screw mounts have tightened screws.
-
Ensure that the handle is not damaged and is properly
secured.
5
Castors / Wheels / Wheel axles
-
Check that the tyres, bearings and wheel axles are not
worn, and that the wheels turn easily.
6
-
Can be machine washed at 60-80 ° C temperature.
4
Original spare parts from Etac should always be used.
Handle
Textile accessories