Clinton 3030 Instrucciones de montaje - Página 2
Navegue en línea o descargue pdf Instrucciones de montaje para Equipamiento médico Clinton 3030. Clinton 3030 4 páginas. Treatment tables with adjustable backrest or non-adjustable top
Imprimir página
ASSEMBLY INSTRUCTIONS FOR ALPHA SERIES TREATMENT TABLES
MODELS 3010, 3020, 3030 & 3013 with ADJUSTABLE BACKREST/KD & Tables with Pre-Attached Backrest
For MODELS 3010, 3020, 3030 & 3013 with NON-ADJUSTABLE TOP and PRE-ATTACHED TOPS Skip STEPS 5,through 9
Thank you for counting on Clinton to meet your medical
equipment needs by purchasing this fine equipment. All
Clinton equipment is designed and manufactured to
provide years of dependable service because we want you
as a customer now and in the future. Below are easy to follow
instructions on how to properly assemble your equipment.
Please contact us at 800-441-9131 if you experience any
difficulty with the assembly or have questions.
INTENDED USE
Clinton treatment tables, models 3010, 3020, 3030 &
3013, are specifically designed and engineered for the
use by a single person at a time, who is attended to and
observed by trained medical personnel. Never leave
anyone on the table unattended. Person's weight and the
combination of force exerted on the table during treatment
is not to exceed a total of 450 lbs.
KD
Hardware Package
Quantity
(4)
/
-20 x 1 ½" Hex Bolts
1
4
(4)
/
-20 x 1" Hex Bolts
1
4
(2)
/
-20 x 1" Truss Head Screws
1
4
(4)
/
-20 x 2
1
5
4
(2)
1
/
-20 x 1" Truss Head Bolts
4
(8)
/
" Washers
5
16
(6)
/
" Locknuts
5
16
(4)
/
" Locknuts
1
4
(4)
1
/
" Black Truss Head Screws (3030 & 3013)
1
4
Tools Required
Wrench & (2) Allen Wrenches Provided
Phillips Screwdriver and Adjustable Wrench (not provided)
Open the frame box, remove all packaging and
1
position the table frame upside down on a soft
surface that won't mar the top. Position the legs
up as shown below.
MAXIMUM WEIGHT CAPACITY 450 LBS
Pre-Attached
Quantity
/
" Truss Head Screws
8
Use the hardware and tools provided
2
to secure the legs into a locked
position using the
" locknuts. DO NOT to tighten at this time.
and
1
/
4
Attach the spanner between the two legs
3
using the
provided and completely tighten all 12 frame
(4)
connecting hardware points from step 2
(4)
(0)
(0)
(0)
(4)
(0)
(4)
(4)
Spin the 4 adjustable feet into the legs. With
4
assistance, invert the table into an upright
position on all four legs, using caution when
inverting the end with the adjustable headrest.
/
-20 x 1 ½" hex bolts
1
4
/
-20 x 1" hex bolts and wrench
1
4